Fenix L0D CE runtimes

[chevrofreak]

Overall output measurements taken in my home built integrating sphere at the start of the run.

Fenix L0D CE - high - Energizer E2 lithium: 895 (est 63.93 lumens)

Fenix L0D CE - high - Duracell coppertop: 772 (est 55.14 lumens)

Fenix L0D CE - high - Sanyo HR-4U 900mAh Ni-MH: 754 (est 53.86 lumens)

Fenix L0D CE - medium (primary) - Energizer E2 lithium: 291 (est 20.79 lumens)

Fenix L0D CE - medium (primary) - Duracell coppertop: 268 (est 19.14 lumens)

Fenix L0D CE - medium (primary) - Sanyo HR-4U 900mAh Ni-MH: 262 (est 18.71 lumens)

Fenix L0D CE - low - Energizer E2 lithium: 127 (est 9.07 lumens)

Fenix L0D CE - low - Sanyo HR-4U 900mAh Ni-MH: 114 (est 8.14 lumens)

Fenix L0D CE - low - Duracell coppertop: 106 (est 7.57 lumens)

The L0D CE is pretty much 2x as bright as the L0P SE on all levels, yet has slightly longer runtime.



Here are the runtimes on the 10440 Li-Ion as promised.

Fenix L0D CE - high - AW 320mAh 10440 Li-Ion: 2190 (est 156.43 lumens) (cell measured 3.76v after 10 minute cooldown/rest after runtime)

Fenix L0D CE - medium (primary) - AW 320mAh 10440 Li-Ion: 819 (est 58.4 lumens)

Fenix L0D CE - low - AW 320mAh 10440 Li-Ion: 367 (est 26.21 lumens)

 

[Erasmus]

Great work! Thanks!!!

 

[cdosrun]

Agreed, thank you Chevro. I'm always impressed at the amount of effort some of you 'mainstays' go to for the benefit of others here.

Andrew

 

[lightbug]

Wonderful graphs :goodjob:

 

[thezman]

Thanks

 

[revolvergeek]

Awesome! I can't wait for mine to get here!!!

 

[mchlwise]

Wonderful graphs :goodjob:

Ditto.

You are the runtime king, Chevro.

Hope you do one on a L1DCE soon. :naughty:

 

[cave dave]

Anybody know if they changed the PWM rate? The old strobe effect annoyed me on the lower levels and I would foresee using the lower levels more often on this one.

 

[paulr]

The strobing is pretty noticable.

 

[chevrofreak]

Ditto.

You are the runtime king, Chevro.

Hope you do one on a L1DCE soon. :naughty:

I have the L1D CE going on low right now. It'll be probably a week before I have a whole set of graphs for it though, and the L2D CE might take two

Hopefully the 10440's I ordered will be here sometime toward the end of this coming week and I'll be able to do runtimes on those too.

 

[THE_dAY]

thanks for the very informative and helpful info!

 

[paulr]

Thanks! This light really likes NiMH and doesn't like alkalines

 

[Xygen]

...and the L2D CE might take two

I was just looking for your L2D-CE graphs....
Do you think you can post the "turbo"-graph as it's finished? Or do you want to post 'em all together?
Sorry for being OT and thanks again for your effort!

 

[ruralott]

Fantastic graph. Thank you !!!!

Hopefully the 10440's I ordered will be here sometime toward the end of this coming week and I'll be able to do runtimes on those too.

Can't wait.

 

[chevrofreak]

I was just looking for your L2D-CE graphs....
Do you think you can post the "turbo"-graph as it's finished? Or do you want to post 'em all together?
Sorry for being OT and thanks again for your effort!

I'll see what I can do. I've been slacking off a bit due to a rather nasty cold/flu I've had for the last few weeks.

 

[chevrofreak]

Li-Ion graphs added to the first post.

 

[4sevens]

Fenix L0D CE - high - AW 320mAh 10440 Li-Ion: 2190 (est 156.43 lumens) (cell measured 3.76v after 10 minute cooldown/rest after runtime)

 

[slim shady]

Your having some server problems.Way slow
load times there.Edit nevermind.The site is loading fine now.Probally getting
indexed by google or Yahoo when I was trying to clicky in.

 

[aceo07]

Did you cool it during the 10440 runtime?

 

[adirondackdestroyer]

Holy crap! Over 150 lumens out of a keychain light!!!!! That must completely amaze any and everyone you show it to.

Has it been proven to be safe to run this light with the 10440 cell?