Anyone come across a half decent case for storing 2 or 3 18650's I've seen nice little plastic cases from Soshine for AAA's, AA's and CR123s - but not 18650s. I'm loathed to allow these things to roll around in my tool kit without somesort of case!
18650 storage?
- Thread starter JimmerG
- Start date
Help Support Candle Power Flashlight Forum
I couldn't find anything satisfactory so I decided to make my own. There are also some other recommendations in the same thread.
http://www.candlepowerforums.com/vb/showthread.php?t=212276
http://www.candlepowerforums.com/vb/showthread.php?t=212276
greenLED
Flashaholic
Jimmer, check out the "Keep2Go" tubes:
https://www.4sevens.com/index.php?cPath=82
https://www.4sevens.com/index.php?cPath=82
NotRegulated
Flashlight Enthusiast
- Joined
- Nov 2, 2004
- Messages
- 1,358
Be careful which ones you buy. I have the clear "Keep2Go" tubes and none of them are wide enough to hold 18650's. They work great with 123's and 17670's. I have been informed that the blue colored tubes are larger for some reason and will hold 18650's but I cannot personally confirm that.
pezdragon
Newly Enlightened
I use single snap lid tubes from McMaster-Carr
B) Translucent Polypropylene with Hinged Snap-Outside Lid
They work GREAT fitting one 18650 perfectly.... 10 for $5.40....go to http://www.mcmaster.com/
and type in the part# 5274t67
PEZ
B) Translucent Polypropylene with Hinged Snap-Outside Lid
They work GREAT fitting one 18650 perfectly.... 10 for $5.40....go to http://www.mcmaster.com/
and type in the part# 5274t67
PEZ
Egsise
Banned
I just bought 4 Keep2Go tubes.
Clear and green have smaller inner diameter and they are good for CR123.
Blue and light blue inner diameter is bigger and fit 18650.
Last edited:
