037981mp
Newly Enlightened
- Joined
- Jun 5, 2009
- Messages
- 19
Hello cpf I was wondering because I am a newb .on my 18v Ryobi flashlight 4 XR-E's R2. Do I run one buckpuck or something else I want to run then to 1000ma and also is it worth over driving them ....and how do i wire them
specs....
18v
4led Solarforce CREE R2 LED 5 OUTPUTS
# Use a CREE 7090 XR-E R2 LED 5 mode cool white
# Lifetime up to 50,000 hours
# CREE LED R2 an aluminum reflector (light orange-peel-textured reflective coating)
# 5 level of output (300, 150, 75 lumens, strobe, SOS) with Memory
# Memeory function: to use the same level next time, press the butt for 2 seconds to turn off.
# Input Voltage: 3.0-8.4v
# Max Input Current: 1000mAh
# Diameter: 26mm
:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs
specs....
18v
4led Solarforce CREE R2 LED 5 OUTPUTS
# Use a CREE 7090 XR-E R2 LED 5 mode cool white
# Lifetime up to 50,000 hours
# CREE LED R2 an aluminum reflector (light orange-peel-textured reflective coating)
# 5 level of output (300, 150, 75 lumens, strobe, SOS) with Memory
# Memeory function: to use the same level next time, press the butt for 2 seconds to turn off.
# Input Voltage: 3.0-8.4v
# Max Input Current: 1000mAh
# Diameter: 26mm
:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs:twothumbs