Sold/Expired MC-E + 18650

[download]

FS a few of MC-E K bin WF full power driven by 18650 light.

Driver: MOSFET direct drive 3 mode with memory, 100%, 25%, 5% brightness, no Strobe or SOS
Battery: 18650 & protected 18650
Reflector: Metal Orange peel. Please ask if you want Mirror type.
Change mode by switching off & on with reverse clicky.
Dimentions : SS= 23.5 x 108mm, HAIII= 23 x 120mm
Weight w/o battery : SS= 116g, HAIII= 66g

Current checked from 18650 negative terminal:
4.11V current draw 3A, 0.18A, 0.02A
4.08V current draw 2.8A, 0.18A, 0.02A
4.02V current draw 2.3A, 0.15A, 0.02A
3.8V current draw 1.8A, 0.15A, 0.01A

The Unscientific estimation:
Battery full should : 100%~700lm, 25%~175lm, 5%~20lm.
Runtimes : 100%~40mins, 25%~10hrs, 5%~a week

HAIII Natural: $130 Ship worldwide registered ( Temp out )

Polished Stainless Steel : $230 Ship worldwide registered ( Sold )

 

[download]

2nd Run HAIII : Finished

1. Gaius - OP reflector, green tailcap. - shipped
2. Psychomodo
3. Scout24
4. martonic - OP reflector, green tailcap. - shipped
5. paulsl - OP reflector, green tailcap. - shipped
6. thenolden - OP reflector, green tailcap. - shipped
7. RGB_LED - OP reflector, green tailcap. - shipped
8. zoran - OP reflector, green tailcap. - shipped

Backup:
1. saltytri - OP reflector, green tailcap. - shipped
2. beetleguise - OP reflector, green tailcap. - shipped
3. easilyled
4. kiely23+
5. SpeedPRO

 

[donn_]

A few questions:

1. Color bin?
2. Emitter wiring (2s/2p etc)?
3. Reflector size?
4. Can you substitute a black switch boot?

 

[download]

1. Color bin: WF
2. Emitter wiring: 4 Parallel
3. Reflector size: HAIII 20mm, SS 18mm
4. Yes, black switch boot is possible.

 

[nfetterly]

newbie question - "mirror type" reflector - this results on more flood?

 

[download]

"Mirror type" reflector will throw more, but more "donut" too.

 

[Gaius]

Can you give som info:

1. Dimentions
2. Runtimes
3. Lumens
4. Weight

 

[mcmc]

How is the beam? Any donuts?

And +1 on est. lumens outputs at the different levels =)

Finally, how's the light level switching done on the MOSFET?

Very interested in that SS =)

 

[JeffN]

Very interesting light. Looks identical to the Jet-I MK I.B.S. I'm EDCing, except the size must be scaled up to allow 18650 vs 14500. IIRC the knurling pattern and clip openings on the HA Nat look similiar to ones Jetbeam used to use, too -- were these bodies used in production of a former Jet-III?

 

[Alan B]

I'll take one in HA-III Natural, OP reflector.

 

[download]

Gaius,

1. Dimentions : SS= 23.5 x 108mm, HAIII= 23 x 120mm
2. Est. runtimes : 100%~40mins, 25%~10hrs, 5%~a week
3. Brightness index : 1000, 245, 30
4. Weight w/o battery : SS= 116g, HAIII= 66g



mcmc,

SS almost has no donut, due to smaller orange peel reflector.
HAIII have small donut.
Change mode by switching off & on again.
Actual brightness index read by light meter : 1000, 245, 30



JeffN,
It is Enlarged clone.



Alan B,
Thanks

 

[Gary123]

Are these forward clickies or reverse clickies on these lights?

Are the reflectors dedicated P7/MC-E reflectors or modified cree / SSC reflectors?

 

[download]

Gary123,

It is a reverse clickies.
Modified cree reflectors are used .

 

[s13uras]

Ill take one HA-III Natural with OP reflector, just let me know where to send the money in a pm

:thanks: s13uras

 

[s13uras]

Thanks s13uras

 

[Gaius]

Wow, that is some impressive data on the light.

I'll take one in HA-III Natural, OP reflector. Where should I paypal the money?

Another question, how is the heat on 100%

 

[download]

:thanks: s13uras & Alan B.

HAIII Natural : Temp out, please let me know here if want more.

 

[Psychomodo]

:thanks: s13uras & Alan B.

HAIII Natural : Temp out, please let me know here if want more.

I'd like one please


HAIII Natural, OP reflector

 

[donn_]

I'll take one in stainless, OP reflector, black switch boot.

I don't do PM, so please email PP info to:

 

[donn_]

:thanks: