2x26500 Megalennium by FiveMega

[Steve in SoCal]

Is there a list available which bulbs you can drive in this sweet thing and how the runtimes are? I'm thinking about either this here or the 3x18650 Version

With a KT4 head the following bulbs/light assemblies should be ok

Surefire:
MN15
MN20

Lumensfactory:
HO-M3T
EO-M3T
IMR-M3T

Welch-Allyn Bi-pin (needs FM adapter as indicated above)
1111

 

[ShineOnYouCrazyDiamond]

With a KT4 head the following bulbs/light assemblies should be ok

Surefire:
MN15
MN20

Lumensfactory:
HO-M3T
EO-M3T
IMR-M3T

Welch-Allyn Bi-pin (needs FM adapter as indicated above)
1111

I would be VERY careful with the MN20 in this config. With 2xIMR16500 the voltage is pretty high. I had one explode in this exact light after running only 30 seconds on high (w/ AW SoftStart) and completely ruin a KT4 head.

A MN bi-pin and a WA1111 will cost you about $50-60 same as two production LAs, is brighter than IMR-M3T and MN20 and will give better options down the road.

 

[flashfiend]

Will this host work with an MN bi-pin adapter using the included head?

 

[jp2515]

Will this host work with an MN bi-pin adapter using the included head?

According to the first post, yes.

 

[flashfiend]

It didn't sound like the included head came with a reflector.

 

[fivemega]

Will this host work with an MN bi-pin adapter using the included head?

No,
Included head is designed to accomodate, Pelican bulb reflector module which is available in post #1 of this thread.
When using Pelican bulb reflector module, you won't need any lamp assembly or socket.

Since threads are M head compatible, you can also use WA1274 with your MN socket and KT4 head.

 

[Fichtenelch]

PM sent about a grey one with included 2" head, mcclicky and intl shipping

 

[Fichtenelch]

Paypal sent for 2x26500 gray host with 2" head and mcclicky

 

[Rat6P]

for

#16 Gray 2x26500 Megalennium body and tailcap $99
Installed McClickie switch $20
International Shipping $10

Total: $129

 

[Hammer Train]

Can I use this body with an M4 head and a Nailbender D36 module?

 

[fivemega]

Can I use this body with an M4 head and a Nailbender D36 module?

Any $urefire M3T, M4 and M6 head will fit these bodies but I don't think any D36 module will fit above heads.

 

[Eric242]

Exactly, the nailbender D36 module will fit the M3 head only, not the M4.

 

[Rat6P]

Well my 2x26500 body arrived.
FM's work is excellent. This is my second FM body and it's my favorite.
Will be a welcome addition to my Seraph P7 TH.

The only thing I don't like about it is the fact that USPS seemed to have used it for a soccer match on a warehouse floor or a hammer for some odd jobs.
The state of the packaging was terrible and ripped all over. The 2X26500 body has dings and scrapes all around.
I thought AusPost was bad but this is terrible.
Disappointing to pay this much for damaged goods to say the least.
At least they left a pathetic little note apologizing for the damage and saying "We care..." and that they would try to ensure it wouldn't happen again.
At least the threads were not squashed and the body is still functional.
FM you may want to beef up the packing a bit, or even offer some stronger (optional) stuff for a few more dollars.
Maybe even have some words to USPS.

 

[c0t0d0s0]

Any $urefire M3T, M4 and M6 head will fit these bodies but I don't think any D36 module will fit above heads.

Regular M3 head with standard bulbs also fits this body just fine. Can't speak for compatibility with Nailbeder's drop-ins though.

 

[fivemega]

Can I use this body with an M4 head and a Nailbender D36 module?

Regular M3 head with standard bulbs also fits this body just fine. Can't speak for compatibility with Nailbeder's drop-ins though.

Exactly, the nailbender D36 module will fit the M3 head only, not the M4.

That's right.
According to Nailbender's thread, it will fit M3 standard 1.5" head (Not M3T) and these bodies are compatible with M3 heads.

 

[Stephen Wallace]

CPF member Stephen Wallace.

Last purchase for the day!

$129.

#17 Gray *body and cap only* - $99
McClickie switch - $20
International shipping to UK - $10

Many thanks.

 

[Stephen Wallace]

Liked it, found another use for it, please can I have another one!

CPF member Stephen Wallace
Paypal sent for $129
#18 Grey body and tailcap - $99
McClickie switch - $20
International shipping - $10

 

[Chrisdm]

I'll take:

#19 Gray 2x26500 Megalennium $139

Paypal on the way thanks!

 

[Chrisdm]

Got it, thanks FM

 

[taylor]

Paypal sent for the following items:

#21 Gray 2x26500 Megalennium $139
Installed McClickie switch $20
Borofloat lens $7.50
Shipping $10

Total : $176.5