3 Lumens On A Flashlight

Candle Power Forums

Help Support Candle Power:

ragweed

Enlightened
Joined
Dec 31, 2009
Messages
725
City & State/Province
USA
Is the 3 Lumens useful or not? I have seen several lights offering this option. I would like some feedback from people that use this mode. Thanks!
 
I use a 1 and 0.2 lumen setting at home for walking around at night. Once your eyes adjust, it's quite bright. In most of my uses, 0.2 lumens gives me a spot about as bright as moonlight wherever I want it, and 1 lumens is almost too bright in the dark.
 
I find 3 lumen way too bright in the middle of the night, but it partly depends on the type of beam. Floody, Sundrop on low is right around there, and nice to read by at night,but I couldn't walk my dog by it. Converse is true with my Haiku on low, just enough for dog walking if need be, but too much to read by unless you use the edge of the beam. What are your plans for it?
 
Potty light at night & I don't want to disturb anyone sleeping.
 
A lot depends on where, when and how you intend to use it.

I think I'm one of the biggest fans of low lumens and probably spend about 40% of my usage on moonlight 0.2 lumens, and 40% one step above that (4 lumens Quark, 2.2 lumens Zebralight). I use my lights... well, when it's dark and I really like using and preserving my night vision. Indoors with short distances and white walls, 4 lumens just about always seems to be more than enough for me (moonlight better with night adjusted eyes).... 20 lumens in the dark indoors always seems way too bright. Walking the dog outdoors, moonlight seem too low, 4 lumens just right to my dog leash's perimeter (20ft), but 20 lumens+ if I want to see farther. If you plan on using the light where there's a lot of ambient light (urban street lit), or have just come in from daylight, 3 lumens is not going to look like much.

Here's one huge plus for low levels... if emergency use is one of the reasons for having a good flashlight, then having low mode(s) will greatly extend your runtimes.... and in such cases, your eyes will definitely be night-adapted. The downside is having to cycle through an additional mode.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
If it is really dark, 3 lumens is very useful. The three lumen low on a Surefire E1L is more than enough to walk around with or find stuff in a tent. The big plus is that if the circuit is efficient, the batteries will last a very long time.
 
Three lumens is more than I like for a low level. Once your eyes are dark adapted you'll find it pretty bright. So, yes, this is a useful level for most up close work. It's really just personal preference. Some folks aren't happy with such a low.

Geoff
 
Personally, 3lm is too bright for that mission. Maybe try a Thrunite Ti Firefly with the .04lm low. For $16.95ish, it'll move quickly in the MP if you don't like it.
 
Thanks everyone! Guess I will go with a model with 3 lumens. Better too much than too little light.
 
Last edited:
As reppans said, it all depends on where you're going to use it. If it's for the waking up in the middle of the night trip to the bathroom trying to avoid family pets or kids toys, it's more then enough. My HDS rotary at .28 is plenty for walking around a dark house.
 
one of the modes on my Predator is 1 lumen...I love it. It's plenty bright when yu are already adjusted.
I wouldn't have a use for a light that was ONLY 1 lumen, but I like the setting. With a quick twist I go from 1 lumen to 370 OTF lumens!!
 
3 lumens for me = too bright for around the house at night WHEN people sleeping, BUT, it's perfect for navigating a dark building, during a power outage, around a camp fire, in the woods when you just need to move around camp etc. It could be brighter, but, as others have mentioned, the lower setting helps extend the runtime. Think about it...if you CAN navigate with 3 lumens, why would you have 6 lumens, and shorten the runtime? That what makes the SF (I assume these are what you're talking about, since it's mostly them that have that setting) such great outdoors light...a lot of them habe just the two useful settings, making them simple but effective.
 
I agree that there is a use for very low lumens. For instance, I usually check on my boys at night with a tiny little keychain led. Birght enough for me to see, but not too bright to disturb their sleep.
 
after reading about 3 lumens, I considered it

then actually using .04 lumens, I realized 3 is too high.

sub 1 lumen is great for not disturbing others, or not waking yourself up all the way to do something at night
 
Once night vision is achieved, 3 lumens is BLAZING. I wrestled with this for months before I got to use a .25 lumen. .25 lumens is perfect for around the house at nite to not disturb others. I didn't believe it til I tried it and my eyes are gettin' on to boot.

Now I wonder about .04 lumens. I can't believe it would be enough.

I should imagine .04 lumen would be about equivalent to the greenish glow from my older flip-phones little display, coz .25 lumens is WAYYYY brighter than that flip-phones display.
 
I have a Gerber Infinity Ultra...the old model, left from when they bought out whoever made them first. I don't know what lumen level it reaches, but it is good for emergencies, or rummaging around in a tent, lighting your way to the bathroom, or on a "dark and stormy night" onto a railway right-of-way to photograph a train wreck, or finding your way around the house in a power failure...to find something brighter, or as a last resort, through the bushes, if a wild animal has run away with your shoes and good flashlight. I prefer my Inova X1s, which are nearly as small, but brighter. Neither of them give enough light for me to try identifying and engaging a hazard across my back yard, tho. My personal preference is for more light, not just enough to scrape by.
 
0.2 lumens sometimes wakes my wife. I have to hold the light in such a way that my hand blocks the spill.

I think a 0.05 lumen low would work well sometimes.
 
As a general reference 3 lumens is about the brightness of a mobile phone screen set to white (many people use that as flashlights) so it is a very useable mode.
 

Latest posts

Back
Top