• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 3rd Run: MC-E + 18650

download

Flashlight Enthusiast
Joined
Jun 26, 2005
Messages
1,630
Location
Sol 3
3rd run: MC-E M bin WC full power driven by 18650 light.

P1040022b.jpg


P1030933b.jpg


8 lights only. ( updated at 16 Mar.,2009)
Finish & ship within 2 months.

Driver: MOSFET direct drive 3 mode with memory, 100%, 25%, 5% brightness, no Strobe or SOS
Battery: 18650 & (limited length for protected 18650)
Reflector: Metal Orange peel. Please ask if you want Mirror type.
Beam pattern: Slightly donut.
Change mode by switching off & on with reverse clicky.
Dimensions : HAIII= 23 x 120mm
Weight w/o battery : HAIII= 66g

Current checked from Li-ion 18650 negative terminal:
4.11V current draw 3A, 0.18A, 0.02A
4.08V current draw 2.8A, 0.18A, 0.02A
4.02V current draw 2.3A, 0.15A, 0.02A
3.8V current draw 1.8A, 0.15A, 0.01A

The Unscientific estimation:
Battery full should : 100%~700lm, 25%~175lm, 5%~20lm.
Runtimes : 100%~40mins, 25%~10hrs, 5%~a week

HAIII Natural: $130 Ship worldwide registered

Please send $30 for reservation. (Do not pay, 3nd run list is full. Thanks! 23 Mar.,20009)
Cash Paypal:
downtoload.jpg

Credit Paypal:
2xf.jpg
Please add 3%

1. Sprocketman - OP reflector, Black tailcap --------- shipped
2. SpeedPRO - OP and any tail cap ----------------- shipped
3. motorhed66 - OP reflector, Green tailcap --------- shipped
4. sprinkle - OP reflector, black tailcap -------------- shipped
5. Sober - OP reflector, Green tailcap --------------- shipped
6. gessner17 - OP reflector, any tail cap ------------ shipped
7. nitewind - OP reflector, Green tailcap ------------ shipped
8. KSC001 - OP reflector, Green tailcap ------------- shipped
9. FRANKVZ - OP reflector, Green tailcap ----------- shipped
10. rkjr - OP reflector, Green tailcap --------------- shipped

1st & 2nd Run http://www.candlepowerforums.com/vb/showthread.php?t=217846
 
Last edited:
I love the old school , big Danzig era misfits fan .Really stoked to get on this run..where can I score a holster for this bad boy.
 
...where can I score a holster for this bad boy.
motorhed66, the light is a bit beefier than a Fenix P3D and about the same lenght so, you've guessed it, I have been using my old Fenix P3D holster for my MC-E 18650. The fit is almost perfect; snug without causing too much bulging. I also have a Maxpedition 5" holster but it's a bit too big - the Single Sheath may work better.
 
Last edited:
I am very interested in one of these lights. Is there a option to add a pocket clip? Also is there an option to add an extra switch to the order?

I am pretty new to the different switch designs. Is there an advantage to using a reverse clickie instead of a forward clickie specifically for this light? And is there an option for a forward clickie at all?

Thank you,

Sprinkle

*sorry if this double posts... browser hiccuped and since my post level is low I can't review to see if it went through*
 
sprinkle,

I did not find any suitable pocket clip yet, extra switch is possible.
Because of the limited size inside the tail cap, can't find the right size of forward clickie replacement yet.

This is the smallest host that pull out the maximum power of MC-E with reasonable run time. :)
 
any chance of us northern neighbours being able to use MO (in USD) to get in on this? I would of course pay for USPS shipping. :poke:
 
sprinkle,

I did not find any suitable pocket clip yet, extra switch is possible.
Because of the limited size inside the tail cap, can't find the right size of forward clickie replacement yet.

This is the smallest host that pull out the maximum power of MC-E with reasonable run time. :)

Thank you for the response. Couple more quick questions and I will be ready to place an order.

How much would the extra switch cost? And would you want me to pay for it in advance or just stick to the $30 to reserve my spot?

What is the outside diameter of the flash light?

Would there be enough lip at the tail end of the light to maybe adapt one of the nitecore clips to it? Not sure the space needed, just wondering if you could make an educated guess whether you think it might be able to work. Here is the clip: https://www.4sevens.com/product_info.php?cPath=93_97&products_id=637

Sorry for all the questions, and thank you very much!
 
Top