ilikemoneygreen
Newly Enlightened
- Joined
- Sep 21, 2012
- Messages
- 21
So i was cleaning an air rifle because it was pretty dirty and was out in rain. I think i was over ambitious with some tissue paper. Its a higher quality beemon so I dont want to junk it. But to make a long story short, a whole tissue is stuck inside the nose of the barrel. Ive tried lots of things but cant quite get the thing clear. I went out and bought another gun cleaning kit, stuck on the ram looking attachment, hammered it in hard for like 30 minutes and that rod got bent. i somehow bent the connecting part of the two cleaning poles, so now ive got tissue paper thats probably packed very tight, and a ramrod stuck in the barrel. in summary
Barrel : [2 inches of air][tissue paper probably 2 or 3 inches] [brass looking ramrod thats 6 or seven inches with a mangled connecter][4 inches of air]
it .177 cal.
i poured half a thing of honing oil in the barrel a month a go, seems to have soaked in but its still not moving with a hammer. Any tricks? paper eating chems that dont rust riffling in barrel? idk, im at a loss currently. i dont want to mangle the rifling too bad either...
Barrel : [2 inches of air][tissue paper probably 2 or 3 inches] [brass looking ramrod thats 6 or seven inches with a mangled connecter][4 inches of air]
it .177 cal.
i poured half a thing of honing oil in the barrel a month a go, seems to have soaked in but its still not moving with a hammer. Any tricks? paper eating chems that dont rust riffling in barrel? idk, im at a loss currently. i dont want to mangle the rifling too bad either...