LED Zeppelin
Flashlight Enthusiast
These are stock Mags that have been hard anodized black. The coating is very hard and at least 0.002" thick.
All lights were new to start except the 6D. All stock parts are included as new, and the lights are reassembled. The anodizing has been removed from the tube and tailcap contact areas.
Left to right at rear:
1) **SOLD**2C: head and tail have been lathe-sanded, smoothing the knurling and removing the lettering on the bezel. Anodizing is a good match throughout, $55
2) **SOLD**2C: no polishing, tailcap and bezel are shinier, bezel lettering intact, $49, $44, $39
3) **SOLD**2D: no polishing, anodizing is a good match throughout, $49, $44
4) **SOLD**6D: this one was used to start, and had evidence of battery corrosion inside the tube just behind the switch. The corrosion was etched and anodized over. The head and tail have been polished but the bezel lettering is still visible. The tube is more matte than the head and tail. The light has a new switch, reflector, and a mineral glass lens, but no bulb. There is a speck of missing ano, a racking mark, at the tail end of the tube visible in the pic above. It could be removed by shaving 1/32" off the end of the tube,$65, $60, $50
Please add priority shipping of $5 except the 6D which is $8, international additional. Post here and PM for payment info.
All lights were new to start except the 6D. All stock parts are included as new, and the lights are reassembled. The anodizing has been removed from the tube and tailcap contact areas.
Left to right at rear:
1) **SOLD**2C: head and tail have been lathe-sanded, smoothing the knurling and removing the lettering on the bezel. Anodizing is a good match throughout, $55
2) **SOLD**2C: no polishing, tailcap and bezel are shinier, bezel lettering intact, $49, $44, $39
3) **SOLD**2D: no polishing, anodizing is a good match throughout, $49, $44
4) **SOLD**6D: this one was used to start, and had evidence of battery corrosion inside the tube just behind the switch. The corrosion was etched and anodized over. The head and tail have been polished but the bezel lettering is still visible. The tube is more matte than the head and tail. The light has a new switch, reflector, and a mineral glass lens, but no bulb. There is a speck of missing ano, a racking mark, at the tail end of the tube visible in the pic above. It could be removed by shaving 1/32" off the end of the tube,$65, $60, $50
Please add priority shipping of $5 except the 6D which is $8, international additional. Post here and PM for payment info.
Last edited:
:thanks:
