Anyone have this 3 mode driver?

bosh

Newly Enlightened
Joined
Mar 19, 2008
Messages
20
Hi all,
I have a Sgt. Burkett on the way and wanted to put a 3 mode driver in it. Something with just High, med & low (no blinky stuff). For some reason these seem to be a rare beast. I found this on KD, it has 3 modes but doesn't say what they are http://kaidomain.com/ProductDetails.aspx?ProductId=1694 . I was hoping someone on here may have one of these and could fill me in on what the modes are.
Also does it look like something that will work well with a single 18650?

I have a 17 mode driver on the way from DX but would rather just have a striaght 3 moder so I don't have to worry about it switching groups when I don't want it to.

My backup may be to take apart a Dereelight 3SD and see if I could stuff that in the Burkett (if I can find a reflector that will work).

As you can tell I don't know anything about this stuff.. :shakehead but I'm gonna give it a shot.

Thanks.
 
The Shoppe has the GDuP which is 3 level and very nice.
 
How come KD claim it to be a 7135 1.2 amp driver when 7135's are 350ma drivers?
2 of them get you 700ma
3 get 1050ma (like the 2 mode one pictured above which I measured at 1050ma +/_ and 120ma so 100% and 12 %)

Perhaps it uses 4 and PWM to drop it from 1400ma to 1200ma???
 
Ouch! For that price just buy a Jetbeam IBS circuit or complete light and you get 3 programable modes,

Or a DBS 3DS pill and get the driver
 
Top