• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

B@rt's tritium thread continued

Status
Not open for further replies.

B@rt

Flashaholic
Joined
Nov 21, 2001
Messages
10,467
Location
Land of Tulips and Philips
I know nothing about guns, so I can't help you there, sorry. The 1.55x5mm vials usually fit in a 1.5x5mm slot, I have never had issues with that, but you can always send them back if they don't suit your needs.
For letter mail shipping please send F&F PayPal to my pixpimp address and email me your shipping address. Your total for 5 green vials + shipping is $41.50.
 

MOVINGTARGET

Newly Enlightened
Joined
Jan 4, 2015
Messages
6
Hi B@rt, I haven't been on this site for several years, glad to see you are still OK, and selling vials, I do have a question, when you say to send the payment F&F to your pixpimp PayPal address, what does F&F mean?



Anyway, I want to order 1 x 1.5x5 mm (RED) and 1 x 1.5x5 mm (Orange)

does that total $19.00?
 

MOVINGTARGET

Newly Enlightened
Joined
Jan 4, 2015
Messages
6
OK B@rt, I sent $19.00 to your PayPal Email Address for 1 x 1.5x5 mm (RED)
and 1 x 1.5x5 mm (Orange,) do you still have my P.O. Box Address?
 

MOVINGTARGET

Newly Enlightened
Joined
Jan 4, 2015
Messages
6
Howdy, I think I know what I want. But sizing seems to elude me.
5 x 1.55x5 in green if you still have them.
Because I'm forum illiterate, PayPal is pixpimp(at)gmail.com? F&F no note? Then just email you my address at the PayPal address?

To make this smaller as I really over elaborates. Gutting the long descriptions.
For a M70AB2 or other yugo AKMs with tritium night sights. 1.55x5 will work. If a bit short.
Diameter is good. The front sight post could do with being ~3 millimeters longer though. It will work.
Wolf/t91 front sight post with hole for tritium. This also works but it's absolutely tiny in length. I just crammed a bunch of RTV silicone in on either side.

I'll take the 5. But any info or guidance would be much appreciated for myself and whoever googles this. Sorry for the long descriptions, hoping google will point to this for others.
They can be attached to the Front Post vertical position, and at the bottom of the Rear Peep Sight Hole in a horizontal position to form an upside down T, with the bottom of the T which is at the top of your Front Post as your zero.

I first clean both areas with a Q-Tip and some Acetone to remove and lubrication, or cleaning solvents, then I use a slow setting (like a half hour) 2 Part Epoxy Glue, and carefully attach the vials with Tweezers to get them into place.

They will work well enough for CQB in a completely dark environment, like in, or around your home at night, but I wouldn't try for any Long Distance Targets...
 
Status
Not open for further replies.
Top