Re: Budget High-Performance LED DX/KD Flashlights Review Roundup (Part IV)
UNHAPPY UPDATE
- I've received my "replacement" Fenix T1! But....
When I put in fresh new Panasonic primaries, it didn't feel as bright as before. (This was the first time I turned it on since received)
I put in fresh new RCR's also and it's the same. Not as bright as it should even to my eye..... I wish my eyes were lying...
So I put it up to my usual lightbox test and it was about 20% dimmer than my previous Fenix T1 or my friend's TK10.
Fenix TK10 - 195 lux (fyi - TK10 uses identical light engine/reflector to T1)
Fenix T1 old - 195 lux
Fenix T1 new - 160 lux (no~~~~~~)
When I put it on my runtime test setup, I should be getting about 160mA from my light sensor as per previous T1 and Tk10.
But I am getting only 130mA. (This is a very accurate "relative" test setup actually that I use for multiple same lights)
When I look into the Cree emitter, I can see that the clear dome isn't as "clear" as it should.
It's gonna be hard to take a photo of what I'm seeing but I've seen many Cree emitters and this one definitely isn't 100%.
It seems I got a bad one again...... Seems my luck with Fenix is worse than most cheaper lights I buy..... =(
No idea what I'll do about it. Cost me $15 to ship to US last time. Don't want to resend. =(
I've emailed fenix-store so let's see what they say...