blink and you'll miss it

fenix-store
Oh so it's not actually out yet? Odd for Surefire to do that.

When the P6D and G3 came out it wasnt on their site untill sometime after places had them.
 
Mad1 said:
When the P6D and G3 came out it wasnt on their site untill sometime after places had them.
Click to expand...
I assume you mean the 6PD...

Anyways, the new L1 has a shorter body, new bezel featuring new TIR optic for the Cree XR-E LED. The output ratings have changed significantly to 10 and 60 lumens.
The beam profile of the new L1 and new KX1 bezel (used by the new E1L & E2L) is unlike the current L1 and current KL1 bezel. SureFire's new TIR optic & Cree XR-E combination produce a far more balanced beam with an intense central beam and good surround beam.

The new L1 is a whole new product and in my opinion one of the most impressive new products along with the Titan that SureFire are releasing this year.

Al :)
 
I can't wait to see beamshots of the new Cree lights, especially the L1. Since Surefire is known for understating the output of their lights, I wonder what the first users will report the output actually will seem like.
Some people have complained about the low output seeming too high, but I don't think there will be a problem with some smart person here at CPF figuring out how to add/swap the resistor in the tailcap to give it a lower low.
I'm just chompin' at the bit to get/see one of these things in action. I wish we could get a more definite ETA on these babies....
 
Size15's said:
.

Anyways, the new L1 has a shorter body, new bezel featuring new TIR optic for the Cree XR-E LED. The output ratings have changed significantly to 10 and 60 lumens.

Al :)
Click to expand...


I have always avoided L1 for its length and output, thus with the improvements the new one will be my next light.


is there a dancing banana emoticon for CPF? I woulce really use one right now.
 
Thanks for all the info guys, I really can't wait to get this light.

The only thing I didn't like about my lost L1 was it's length for a 1cell light.
 
Last edited:
I also wonder how the new L1 will compare to my SSC-P4 modded KL1 head running in two cell mode, which is about 500mah...
 
Size15's said:
The new L1 is a whole new product and in my opinion one of the most impressive new products along with the Titan that SureFire are releasing this year.
Click to expand...

I agree, it looks like an excellent addition to the Surefire lineup. The only thing I don't like is that low isn't low enough, and that kills it for me, I'm afraid.

Maybe one of the modders will offer a solution for that.

Hans
 
Hans said:
I agree, it looks like an excellent addition to the Surefire lineup. The only thing I don't like is that low isn't low enough, and that kills it for me, I'm afraid.

Maybe one of the modders will offer a solution for that.

Hans
Click to expand...

you guys are missing the big picture. the biggest complaint of the L1 from many CPFers before was the high or low being not bright enough, sometimes both. It's much easier to add a resistor to the talcap module than it is to open up the circuit to increase the drive current on high. The high will be bright enoug and it's much easier to dim the low.
 
I would prefer 2/60lm 10lumens is too bright for low.
 
You must log in or register to reply here.

Similar threads

L
Klarus new holster - will it fit an old XTQ1?
Replies
0
Views
69
lumen aeternum
L
B
Is it okay to put three KEEPPOWER RCR123 into SUREFIRE M3LT?
Replies
12
Views
618
fivemega
fivemega
B
Synergy3 and Match Saver
Replies
0
Views
93
bobb
B
MidnightDistortions
Is it possible to repaint a flashlight?
Replies
14
Views
1K
bykfixer
bykfixer
B
How does the light that turns on when you loosen it work?
Replies
6
Views
340
ABTOMAT
A

Latest posts

Top