Have a look at a previous thread showing one member's approach to adding a clip to his MD2
here.
I'll try out the Moddoo HDS/Ra clip later tonight. It wouldn't work with the old-style MD2s since there is no tail cap.
<EDIT> OK, I've tried the Moddoo clip. As expected, it installs very easily between the tailcap and the body. It also is very solid - it gets clamped between the two. If you have the new-style tailcap with a McClicky, you can also install the clip on the tailcap, like installing one on a Z59. This makes for a deep-carry clip. Two things to consider for that configuration... you'll need to add a washer of the same thickness as the clip, since the delrin ring clamps the switch in place, and you'll have about two full turns of threading the delrin ring into the tailcap to hold the clip in place. I've also seen a reference that suggests the delrin ring is going away - maybe an aluminium retainer instead, with an idea to securely holding a Malkoff issued clip in place? (Speculation on my part!)
<EDIT 2> There is a picture of the new tailcap without the delrin ring in the "Official Malkoff Junkie" thread. From the picture, and a description elsewhere, there is no external ring - the McClicky threads in place from the inside, so we're back to the add-on delrin ring with clip or other custom (e.g. drill/tap) options for clips.
Note: This was done on an MD4/Hound Dog/Wildcat since I don't have one of the new MD2s with the McClicky. I expect it applies though.
- Syncytial.