goldserve
Flashlight Enthusiast
Pictures are worth a thousand words.
Once again, my project is in waiting for Jonathan mode =D I sent the TI body in for coating
EDIT: Now that my JIL 1.3W mod is done, time to move onto a project that was on hold.
I wasn't too happy with the stock heatsinking and also, I had to make sure the led gnd was isolated so I came up with my own heatsink. It won't even get warm because it will be driven at 350ma on high.
Heatsink in the can.
Underside...
And finally, this is a mock up. I haven't epoxied everything yet. The light will be host to a Piglet board set to 50-350ma for regular primaries and rechargeables.
Edit: Added final pics!
Thanks modamag for such a nice finish!
Once again, my project is in waiting for Jonathan mode =D I sent the TI body in for coating
EDIT: Now that my JIL 1.3W mod is done, time to move onto a project that was on hold.
I wasn't too happy with the stock heatsinking and also, I had to make sure the led gnd was isolated so I came up with my own heatsink. It won't even get warm because it will be driven at 350ma on high.
Heatsink in the can.
Underside...
And finally, this is a mock up. I haven't epoxied everything yet. The light will be host to a Piglet board set to 50-350ma for regular primaries and rechargeables.
Edit: Added final pics!
Thanks modamag for such a nice finish!
Last edited: