Custom Surefire® Lego Parts M|C|Z|P|G: Adaptors, Extenders, Bezels, Bodies, Tailcaps

[mikeymoto]

#1 - Z44-HA-BK bezel factory black - $32 available
#4 - crenelated stainless steel bezel ring - $29 (bezel + tool) or $18 (bezel) available
#5 - crenelated stainless steel bezel ring - $29 (bezel + tool) or $18 (bezel) available
Shipping insurance, $3 per order
All US (50 states) - USPS Priority box w/confirmation, $7 per order (tracking available with insurance)

$100, incoming via Paypal. :twothumbs

 

[yellow]

CPF: yellow
bored 6P body only, type II aluminum, 58 grams
#14 - 18650 6P-body black - $35 available
Worldwide - 1st Class envelope, $8 per order
Shipping insurance, $3
PayPal anything else is total +4%

so: 35+8+3 = 46 * 1.04 = total 48,--

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

mikeymoto,

Order shipped!

:thanks:

 

[NotRegulated]

for

ONE #8 - 18340 A19-BK cell extender - $34
1st class, $4
CC PP, $1.52
total: $39.52


Thanks!

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

NotRegulated,

Order shipped! (2/24)

:thanks:

 

[lightknot]

I am ready to order. Do the tailcaps below have the McClicky switch installed?
And / or will they handle the current draw needed to run the Modoo XP-G triple?
This is from the first post in this thread.
Z59-HA-BK forward clicky, black type III (HA) aluminum
Please specify alone or upgrade price - upgrades available with purchase of whole lights (bezel/body/tailcap)
#1 - Z59-HA-BK clicky black - $54 (alone) or $44 (upgrade from twisty) ledcarry •Paid/Shipped•
#2 - Z59-HA-BK clicky black - $54 (alone) or $44 (upgrade from twisty) ledcarry •Paid/Shipped•
#3 - Z59-HA-BK clicky black - $54 (alone) or $44 (upgrade from twisty) available
#4 - Z59-HA-BK clicky black - $54 (alone) or $44 (upgrade from twisty) available
#5 - Z59-HA-BK clicky black - $54 (alone) or $44 (upgrade from twisty) available

 

[ElectronGuru]

I am ready to order. Do the tailcaps below have the McClicky switch installed?
And / or will they handle the current draw needed to run the Modoo XP-G triple?

Sorry for the confusion. These are factory clicky switches that are custom refinished in HA black.

The upgrade pricing is for purchasing swap upgrades from the twisty tailcaps, when ordering hosts.

They will not handle the 5+ needed to run an XPG Triple.

You are better off ordering a Z41 (or Z41 equipped host), and adding a McClicky upgrade.

 

[mikeymoto]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

mikeymoto,Order shipped!

Thank you for the fast shipping, got it today!

Note to self: using heat gun to loosen lens retaining ring bad idea; pyrex lens melts! :mecry:

It's all good; thank you for the great stuff! :twothumbs

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

Note to self: using heat gun to loosen lens retaining ring bad idea; pyrex lens melts!

I'm not sure of the melting point of Pyrex, but I doubt any heatgun could even approach the needed temperature. Factory HA-BK bezels come standard with Lexan lenses (a form of polycarbonate). Let us know and we'll see about sending a replacement lens.


Announcement: We have tools and techniques for loosening or removing every piece of every part of everything we sell. If there is something you would like loosened before shipment, just ask.

 

[lightknot]

I'll take it.
PayPal Sent.
CPF ID Lightknot
#14 - 18650 6P-body black - $35
#2 - delrin tailstand shroud Z58/Z59 gloss black - $12
#5 - Z41-HA host - black/2 - $19
#57 - Z41/G McClicky switch kit - $20
All US (50 states) - USPS Priority box w/confirmation, $7 per order (tracking available with insurance)
Shipping insurance, $3 per order (not responsible for loss/damage without it)
Total: $96

I am aware that the tailstand shroud ordered does not fit the tailcap ordered.
Thanks!

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

lightknot,

Order shipped!

:thanks:

 

[brunt_sp]

I'll take:
#2 - 18340 A19-HA-BK cell extender - $46 available
#3 - 18340 A19-HA-BK cell extender - $46 available
PP sent

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

brunt_sp,
LightJunk,

Orders shipped!

:thanks:

 

[lightknot]

Order received, all parts superb. :thumbsup:

 

[yellow]

body received, very quick shipping (while I just took normal Airmail!)

extreme good machining, my cells fit in snugly, no rattling whatsoever

 

[Liteskr42]

Hi EG.

Though not shown, do you have any tan G2Z body/tailcaps?

Thanx for your time and efforts

 

[ElectronGuru]

Though not shown, do you have any tan G2Z body/tailcaps?

Not at the moment, but I expect 1 or 2 soon (one may be already sold)

I'll get more in behind them.

 

[lightknot]

PM sent with 3rd order. PayPal upon reply. Edit: PayPal sent.

 

[jdriller]

Pm sent about order for extender and bezel.

 

[ElectronGuru]

Re: Custom Surefire® Lego Parts M|C|Z|P|G: Extenders, Bezels, Bodies, Tailcaps

jdriller,

Order shipped!

:thanks: