BIGLOU
Enlightened
- Joined
- Jan 14, 2009
- Messages
- 717
I want to apologize to the CPF community for lagging on this one. I just got my RRT-0 body back from my buddy who has a machine shop. I didnt like the stock clip and did not want to use the backing plate that came with the D10 clip. I waited around for JB to come out with a new clip to fit the factory threaded screw holes but it never happened so I got the Nitecore D10 clip. I originally had plans to tap holes on the D10 clip, but my buddy decided to tap screw holes on the RRT-0 tail end instead.
i
Here it is with some of my accessories: I changed the bezel to a HDS/Novatac/Aleph A19/Aleph 2 bezel I got from 47s for $19 it doesnt screw in all the way so I used the extra JB o-ring to keep dust out (Thanks to CPFer Blindasabat who I got the idea from). Left Top is the JB AA extender/adapter. Bottom Left to Right is a Free Diffuser from an Arrowhead water bottle, SF F06 Blue Tip off Filter, Swarfworks RRT-0 bezel removal tool and the stock JB bezel.
i
Here it is with some of my accessories: I changed the bezel to a HDS/Novatac/Aleph A19/Aleph 2 bezel I got from 47s for $19 it doesnt screw in all the way so I used the extra JB o-ring to keep dust out (Thanks to CPFer Blindasabat who I got the idea from). Left Top is the JB AA extender/adapter. Bottom Left to Right is a Free Diffuser from an Arrowhead water bottle, SF F06 Blue Tip off Filter, Swarfworks RRT-0 bezel removal tool and the stock JB bezel.