Sold/Expired For Sale: FluPIC (complete)

[Regentag]

For Sale:

(2) Rev 2.0 FluPic boards (complete) with TX0H emitter for JIL-DD flashlight.

(1) Rev 2.0 FluPIC board (complete) with TX0H emitter for JIL- 1.3up flashlight.

The DD-size boards also work in the ExoLion light and provide 'full' FluPIC functionality.

$45 (each) delivered - USPS Priority USA - PayPal Cash or Credit

Cheers,

 

[Clickie]

Any idea of what it'd take to get one of these to fit in an Arc LS?

 

[Regentag]

No idea. Pliers, a hammer and some Vaseline would probably do the trick.

 

[Ty_Bower]

I know what to do with the hammer and the pliers. Where do I put the vaseline?

 

[Ctechlite]

My advice...Do not use vaseline. It's viscosity tends to break down in harsh environments. I would suggest some heavy duty / high pressure axle grease.

Here's a link to it, hope you don't mind Regentag!
http://home.nc.rr.com/tuco/looney/acme/axle.html

 

[tdurand]

No idea. Pliers, a hammer and some Vaseline would probably do the trick.

I know what to do with the hammer and the pliers. Where do I put the vaseline?

:lolsign: :lolsign:

Nice.
T

 

[bombelman]

Here is more useful advice:
You would need a custom washer to fit these in an Arc LS.
I have used these same Exolion FluPICs in my Arc LS, (with a custom turned washer) and has worked great so far. It was my first mod in my first Arc LS.

Happy selling.

 

[vortechs]

(Ok, let's get this thread back to being serious.)

Hi Regentag,

So how did you end up with all these extra FLuPIC light engines for the JIL's (with TX0H LED's)? Did you just upgrade a bunch of JIL's to Seoul P4's or did you get extra FLuPICs when they were first available?

The FLuPIC's for the 1.3W model are somewhat uncommon. These should work in either the 1.3W or 1.3W(Up) or JCR2-HI models. Unfortunately they don't have the micropuck boost converter, so Li-Ion cells are needed after installing the FLuPIC light engine.

The FLuPIC's for the DD model should work with either the JIL-CR2 DD or the JCR2-LR to effectively turn it into an "Intelli". Prospective buyers should be aware that installing a FLuPIC light engine in a JIL-CR2 DD or JCR2-LR usually requires a small metal spacer ring (available from CPF member goldserve here), although some members have reported installing a FLuPIC without the ring. Do you have the spacer rings or would somebody need to order them from goldserve?

 

[Regentag]

A very nice technical summary - thanks.

I ended up with these as a result of having to "dumb down" a few JIL's for non-Flashaholic use. Not a bad idea though - upgrading them to Seouls... if they don't sell. I do have the spacer rings - they will ship with the DD boards.

Cheers,