Northern Lights
Flashlight Enthusiast
Remember my old thread?
MAG BORING-I BUILT MY OWN MILL-PICT!
it works obviously, haven't used it since. The better half said I had to clean my work room or she would. So, good-by. :wave:
I cannot guarantee you can make it work, it is not automatic and was a little difficult needing a bit of stop and measure as you go along but nevertheless, it worked!
Consists of a cross slide vise, a rasp cutter and support that goes through the light body.
It cost this to make, cross vise, $45,- btw- the vise now costs $55, some metal, bolts and nuts, $35 and an expensive cutter $39, cutter extension shaft $18. I had the drill. I built and have a single purpose-milling machine for about $138; now it would be $148. I am selling it for:
Pictures, Images, Photographs:
Photos click this: THIS
and more links:
http://img253.imageshack.us/img253/8828/dscn0206ku6.jpg
http://img511.imageshack.us/img511/6486/dscn0204yk0.jpg
http://img513.imageshack.us/img513/823/mill3ls5.jpg
You get this, here is an example a two channel for 18mm, e.g. 18650, I have done 4x, click to enlarge:
MAG BORING-I BUILT MY OWN MILL-PICT!
it works obviously, haven't used it since. The better half said I had to clean my work room or she would. So, good-by. :wave:
I cannot guarantee you can make it work, it is not automatic and was a little difficult needing a bit of stop and measure as you go along but nevertheless, it worked!
Consists of a cross slide vise, a rasp cutter and support that goes through the light body.
It cost this to make, cross vise, $45,- btw- the vise now costs $55, some metal, bolts and nuts, $35 and an expensive cutter $39, cutter extension shaft $18. I had the drill. I built and have a single purpose-milling machine for about $138; now it would be $148. I am selling it for:
$50
Buyer pays shipping, shipped UPS or USPS, and insurance. Shipping is done on receipt of payment, PayPal or certified check or money order. I will honor the first "I'll take it" without conditions posted in the thread.
Zip code is 85704 and it will weigh in 50 to 70 pounds, the cross slide vise is advertised at 38 pounds. I will ship by your preference if you do not want to use UPS or USPS.
I check CPF in the night, Mountain Standard Time, UTC/GMT -7 hours. Private Message the specific details please.
This is a custom home made device; Consider since it was not made for commercial sale then it is made with used parts. All the components are modified and are not in the original condition and configuration of the manufacturer. The buyer assumes all risks and responsibility to use this machine. This is a private sale and there is no warranty or guarantee. By making this purchase the buyer certifies they are at least 18 years of age and assume all risks and responsibility to use this device and parts safely and appropriately and accepts the device and parts in an "as is" condition.
Pictures, Images, Photographs:
Photos click this: THIS
and more links:
http://img253.imageshack.us/img253/8828/dscn0206ku6.jpg
http://img511.imageshack.us/img511/6486/dscn0204yk0.jpg
http://img513.imageshack.us/img513/823/mill3ls5.jpg
You get this, here is an example a two channel for 18mm, e.g. 18650, I have done 4x, click to enlarge:
Last edited:
