GDuP engine height vs. normal engine height...

[PoliceScannerMan]

I bought a GDuP and a A19 head kit, it seems everything doesnt want to fit in there. For it to work on my Ti McClickie Pack, half the O-ring hangs out when the Ti bezel ring is in the normal position. If I unscrew the bezel ring some, then most of the O-ring is covered on the clickie pack.

What gives?

 

[TranquillityBase]

Brandon, your A19 head probably has the wrong reflector.

Edit: There's two 19mm reflectors...The original that was designed for the Cree UV LED, and the 19XR is for the Cree XR-E LEDs...There's a .027" difference in length (McR19 is the longer of the two) I believe the A19 head kit comes with the McR19, and you need the McR19XR.

 

[Carpe Diem]

Thanks for this post, TB.

I have a Cree GDuP coming, and originally I was just going to put it into one of my original A19 heads. I do have a spare A19 head kit, though, complete with the McR19XR reflector, so that`s what I`ll now use.

Thanks again, kind sir!

 

[TranquillityBase]

You're welcome

 

[PoliceScannerMan]

You're welcome

Thanks TB!!!

 

[cjawcrusher512]

I agree with you

I agree with you !I support you .