HipFlex current level scaling %

[Doh!Nut]

I have a few of Georges drivers, and from what I understand from the documentation once the maximum current level is set, the minor levels scale up to the maximum current

ie for a HipFlex, I have set the current to 2800ma

Level 1 = a% of 2800ma
Level 2 = b% of 2800ma
Level 3 = c% of 2800ma
Level 4 = d% of 2800ma
Level 5 = 100% of 2800ma

what I would like to know is what are the % of the minor levels so I can work out runtime on DuoMode low.

Thanks

 

[ifor powell]

George will not publish the levels which means he is free to change them.

From what I have seen the levels normaly half the curtent from the previous level with a biger gap if nessasary for the lowest level which is always a fixed minimum e.g. 40 or 50 ma for a maxfelf and bflex. I suspect it is higher for a hipflex though but am not sure. So somthing like

L1 ?? ??
L2 12.5% 350
L3 25% 700
L4 50% 1400
L5 100% 2800

This of course makes the runtime calculations fairly easy. Drop a level double the runtime.

Ifor

 

[Doh!Nut]

Thanks, I thought it was strange it was not published as the rest of his documentation is very thorough.

Level 1 does seem to be very low, Ill try it at level 2 or 3, Just trying to get low level low enough so It will save power and high enough that you dont spend all time using high.