id like to fit a pressure switch lo my LED lenser p7

[scoobyhunter]

:wave:hiya,ive got an LED LENSER P7 TACTICAL torch,and i have a pressure switch that id like to fit,can anyone tell/show me the best way to fit it pleasey weasey? please dont say why dont you buy another torch because i want to mod mine,thats how i am,i like modding stuff,thanks,scoob

 

[scoobyhunter]

omg you lot are rubbish,with all the technical knowhow going on here and nobody can help me with this? c'mon give me a bit of help please...........:candle::candle::candle:

 

[65535]

Not a good start bud. Giving a community of people that work and go to school as well as tend to their families aren't going to wait on you hand and foot. You may want to edit your post before a mod comes along, or someone who wants to report you to a mod.

I'm not entirely sure exactly how your pressure switch works, but you'd need a way to splice the power leads from the pressure switch onto the standard switch in parallel. I know about some lights but not this one. If it where me I would just remove the old switch leaving all the contacts inside and just wire in the switch you want.

 

[scoobyhunter]

lol lol,the switch is just a coiled telephone wire style cable(2 core) with a press for on and release for off switch,the torch has a 3 way press in endcap switch,i cant see how to remove or get into the original cap? (dont get too offended by my comment,i didnt mean it nastily,only kidding and to get a response:naughty:) thanks.

 

[65535]

If the switch in the tailcap isn't a simple on off SPST switch then it won't work well with a pressure switch. What needs to happen is that the cable switch needs to be wired in a way that it closes the circuit in the tailcap when on. That usually means just wiring it in parallel with the stock switch.

 

[scoobyhunter]

i managed to remove the switch in the endcap completley and wired direct to the batterys,just gotta make a new blank for the endcap from some ally,just need to make a weapon mount next.cheers.