Update 7/28 (Pictures Added)
- Respondents so far preferred pic 1 and 2
- Price will be posted 1st week of August.
**************************************************************************
This is a feeler for MiniM@g Big Head Conversion (BHC) using either McR-27 or McR-27L to improve throw. BHC will be a direct bolt on to existing MiniM@g body which requires no modifications. Preliminary designed consist of finned head to improve heat management and knurling on the bezel. CNC shop require minimum of 50 pcs.
Specifications
Design...............Custom design with finned head
Material.............Aluminum 6061
Machining..........CNC
Reflector............McR-27 or McR27L (depending on availability)
Lens..................2mm x 31mm Schott Superwite B270
Light Engine........Compatible with all sandwiches that fit MiniM@g (will not fit MiniPro with heatsink)
Sealing...............2 O-rings
Finish.................Bare aluminum, HAII black, HAIII natural and Nickel Plating
Payment...............Prepayment requires before production
Production date....Late August or sooner
Shipping Date.......Mid of September
Possible Mod with BHC
1. Downboy sandwich, Lux III (U_ _J) and 2x14500 for extended runtime.
2. Downboy sandwich, LuxV using 2x14500.
3. Maybe MiniM@g hotwire setup (Will it work with McR-27 or McR-27L?)
Please post your interest here. I'll have prototype drawing soon and production will start as soon as minimum requirement of 50 pcs are met. I'll check back frequently. Due to different time zone, my response will be slower than anticipated. I'll keep this post open till 50 pcs are met.
Note: This is Just only the head and body is not included.
- Respondents so far preferred pic 1 and 2
- Price will be posted 1st week of August.
**************************************************************************
This is a feeler for MiniM@g Big Head Conversion (BHC) using either McR-27 or McR-27L to improve throw. BHC will be a direct bolt on to existing MiniM@g body which requires no modifications. Preliminary designed consist of finned head to improve heat management and knurling on the bezel. CNC shop require minimum of 50 pcs.
Specifications
Design...............Custom design with finned head
Material.............Aluminum 6061
Machining..........CNC
Reflector............McR-27 or McR27L (depending on availability)
Lens..................2mm x 31mm Schott Superwite B270
Light Engine........Compatible with all sandwiches that fit MiniM@g (will not fit MiniPro with heatsink)
Sealing...............2 O-rings
Finish.................Bare aluminum, HAII black, HAIII natural and Nickel Plating
Payment...............Prepayment requires before production
Production date....Late August or sooner
Shipping Date.......Mid of September
Possible Mod with BHC
1. Downboy sandwich, Lux III (U_ _J) and 2x14500 for extended runtime.
2. Downboy sandwich, LuxV using 2x14500.
3. Maybe MiniM@g hotwire setup (Will it work with McR-27 or McR-27L?)
Please post your interest here. I'll have prototype drawing soon and production will start as soon as minimum requirement of 50 pcs are met. I'll check back frequently. Due to different time zone, my response will be slower than anticipated. I'll keep this post open till 50 pcs are met.
Note: This is Just only the head and body is not included.
Last edited:
