Sold/Expired LS III Mods , one 5W & 2 1W : 2D's & a spyder

[SKYWLKR]

LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

1. SOLD Pewter 2D mag V3U 5 watt UCL with 3 123's or 2 3-d's with out batteries but with your choice of adaptors. seen here: http://www.skywlkr.com/Lights/5wattdd.html


2. Polished silver 1 watt seconds mod with custom UCL lens 2 D's ,3 c's or or 3 AA's adaptor. $40 seen here: http://www.skywlkr.com/Lights/silverlight.html

3. $$$ pending Blue 2D mag 1 watt with stock Mag Lens and sputtered reflector (will put a UCL in if requested and offer refletcs the UCL included) $40 seen here : http://www.skywlkr.com/Lights/blueV1_0.html

4.SOLD TWOJ Lux III in a blue 2D body 3 c's or 3 AA's UCL and sputtered reflector large brass lathed heat sink $60.

5. TV1J lux III in black 2D with Hot lips and UCL and sputtered reflector $60.

6. #6 sold and 7. TWOJ lux III's in the polished aluminum 2D body above with custom cut UCL lens and lathed T-6 heat sinks $60.

8. TWOJ lux III in a Dorcy Spyder body with 2 123's resistored down to 4 watts, cut down reflector and aluminum heat sink very nice and even flood $50.


must sell or trade for neat lights...

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

TTT

 

[BugLightGeek]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

tell me more about #8
runtime?
beamshots?
how warm does it get?

 

[Phil_B]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

Enquiry sent about #1.Phil.

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

#8 I have only used 1 set of batteries. it does'nt get real hot (have run it for about 5-7 min at the most) but it will heat up a bit as it is a very small body but not uncomfortable. I will try and take some pics of it tonight. it has a very smooth broad beam, if you hold it at wasit level it'll illuminate a perfectly diffused walking path about 10 Ft in diameter. I have been using it to walk to my shop in the back yard at night. it is also a good light to use for illuminating a whole wall or large area.

I wanted to find a PR to make it a thrower but I dont have the time nor the donor PR right now.I had to back cut the stock reflecter to get it to have any throw at all. it could be cut some more and focus it a bit tighter but I dont think with that reflector it would be a good thrower.

I had plans on cutting the bezzle and the tail down a hair down and putting a UCL in to make it very short as well.

the LED is Arctic epoxied to the sink and the sink is coated with AS III to help with thermal transfer.

Reply sent on #1

 

[dabiscake]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

I think you should post prices... /ubbthreads/images/graemlins/popcorn.gif

 

[NIGHTGUY]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

Isn't it against posting rules not to have prices on for sale items?

 

[LightScene]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

Post prices so people can buy without haggling.
You can always drop your prices if things don't sell.

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

Price added will put some pics of the Spyder up in a bit.

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

pICS OF THE LIGHTS

HEAT SINK ON SPYDER, resistor is in the the heat sink but can easily be swaped out. the light would be good for some one to take over where I left off it needs a good reflector and it would be an awsome light.

 

[BugLightGeek]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

pm sent

 

[dabiscake]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

PM sent...

 

[J_Oei]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

PM sent

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

BTTT

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

I need to sell these, make an reasonable offer.

 

[cy]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

PM sent on #3

 

[4x4Dragon]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

any other pics we can see, beamshots? are all of these using high domes?

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyder

all the 3 watts are high domes. I tray and snap some beam shots tonight.

I'll compare them to a stealth light, a 3D mag with a UCL and Xenon bulb and a scorpion.

 

[sygyzy]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

What kind of body are those silver (non mag) ones?

 

[SKYWLKR]

Re: LS III Mods , one 5W & 2 1W : 2D\'s & a spyd

they are polished Aliuminum, they feel really good in hand and look great. They look like 2D cells versions of the same body for the Electrolumens Tri-star.They are made in china but the fit and finish is pretty decent. The switch leaks if submerged but the rest is fairly water resistant.

I like the way they look and they Mod very well.