• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired M6 Deep Tail Cap 2x26500

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,538
Location
California
(NOT AVAILABLE)



M6 Deep Tail Cap 2x26500



NOTE: Please allow 7 days to ship


Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.


IMG_0065.jpg



Please read completely before you post or buy then pay and post.



Absolutely NO reservation.


Hi Folks,
These deep tail caps are CNC machined from solid aluminum bar and Mil spec hard anodized to fit on your favorite $urefire M6 to accept 2 AW's IMR 26500, 2 AW's protected "C" cells or 25530 cells. Pair of 26650 cells will NOT fit.
These will add little length (about 10mm) to your flashlight and just enough to accept above batteries.
Each tail cap comes with installed black switch boot and PVC tube to center the batteries. McClicky switch and retaining ring is NOT included but optional for $14 extra.
All you need to do is remove original tail cap, remove original battery holder and install PVC tube, 2x26500/25530 cells and deep tail cap.
Please note: NO M6 body included, NO head, NO lamp, NO battery, NO charger.
McClickie switch and retaining ring is not included in price but optional for $14 extra.
Advantages:
1- You don't have to buy expensive battery holder.
2- You will have higher capacity cells.
3- Capable of higher current draw.
4- You can have it installed McClickie switch or install your own Type B soft start
5- Keep original tail cap intact.
6- No extension tube needed.

Picture shows M6 with installed deep tail cap in top, then included PVC tube, 2xIMR 26500 (NOT INCLUDED) and inside of deep tail cap with optional installed McClickie (buttom right)
Please study about voltage and lamps you can use with these set ups.
DO NOT USE 2 FULLY RECHARGED IMR26500 with MN21
2x26670 won't fit.

No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
Please don't pay if you may change your mind. There will not be any refund.
It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY to pick next[/SIZE] available and valid number, post detail of your order here and paypal note along with your CPF handle.
It is ABSOLUTELY NECESSARY[/SIZE] to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
Example:
Mr Manfire :paypal: of $44 for #68 Deep Tail Cap with black boot
Price:
$38 With PVC tube, without switch (to use with your own soft start switch only)
$52 with installed McClickie switch and PVC tube. (NOT AVAILABLE)
$10 PVC tube only (NOT AVAILABLE)
Extra black boot $1 each
Extra orange boot $1 each
Extra GID boot $1 each
Shipping $6 any quantity to States.
Internationally: $14 for first kit then add $8 for each eatra kit.
Paypal: DO NOT PAY
Please PM for postal money order payment.
-----------------------
Please see:
S 3x18650 Megalennium-B
Parallel 3x18650 Megalennium
2x18650 M4 Body
3x16650 M6 Barrery Holder
3x18650 Leef
2x26500 Megalennium
2x18650 M6 Battery Holder

-----------------------
#01 M6 Deep Tail Kit $52 Steve in SoCal paid shipped 0308073000016683XXXX
#02 M6 Deep Tail Kit $52 Bob96 paid shipped 0308073000016683XXXX
#03 M6 Deep Tail Kit $52 Visible EM Wave paid shipped LC547565352US
#04 M6 Deep Tail Kit $52 LightJunk paid shipped 0308073000016684XXXX
#05 M6 Deep Tail Kit $52 jdriller paid shipped 0308073000016684XXXX
#06 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped 0308073000016683XXXX
#07 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped 0308073000016683XXXX
#08 M6 Deep Tail Kit $38 AW paid shipped LC547565406US
#09 M6 Deep Tail Kit $38 AW paid shipped LC547565406US
#10 M6 Deep Tail Kit $52 william lafferty paid shipped 23080440000026159789
#11 M6 Deep Tail Kit $38 iflyjts paid shipped 03092880000109957168
#12 M6 Deep Tail Kit $52 taylor paid shipped LC547780308US
#14 M6 Deep Tail Kit $52 monkeyboy paid shipped LC548066906US
#15 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
#16 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
#17 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
#18 M6 Deep Tail Kit $38 Siliconti paid shipped 03103490000027884090
#19 M6 Deep Tail Kit $52 nbjly paid shipped 03103490000027889910
#20 M6 Deep Tail Kit $38 syncytial paid shipped CP721456965US
#21 M6 Deep Tail Kit $52 milomilo paid shipped LC458383777US
#22 M6 Deep Tail Kit $52 crazy11 paid shipped 03112550000196383908
#23 M6 Deep Tail Kit $52 koala paid shipped LC452889574US
#24 M6 Deep Tail Kit $52 elho paid shipped
#25 M6 Deep Tail Kit $52 1Tinman MO received shipped 95001108929031025165
#26 M6 Deep Tail Kit $52 geromdan paid shipped LC105690883US
#27 M6 Deep Tail Kit $52 WarriorOfLight paid shipped LC105690897US
#28 M6 Deep Tail Kit $52 dsche paid shipped 9114901159815876963072
#29 M6 Deep Tail Kit $52 m4a1usr paid shipped 9114901159818832566362
#30 M6 Deep Tail Kit $52 Redhat703 paid shipped 9114901159815961076915
#31 M6 Deep Tail Kit $52 MBentz paid shipped 9114901159815876916825
#32 M6 Deep Tail Kit $52 Fibo paid shipped LC333379417US
#33 M6 Deep Tail Kit $52 Fibo paid shipped LC333379479US
#34 M6 Deep Tail Kit $52 jmm244 paid shipped 9114901159815396497477
#35 M6 Deep Tail Kit $52 Icehole paid shipped 23071770000008635054
#36 M6 Deep Tail Kit $52 Icehole paid shipped 23071770000008635054
#37 M6 Deep Tail Kit $52 jso902 paid shipped 9114999944238010732667
#38 M6 Deep Tail Kit $52 hombreluhrs paid shipped 9114999944238010732957
#39 M6 Deep Tail Kit $52 1pt21 paid shipped 9114999944238373515433
#40 M6 Deep Tail Kit $52 Fibo paid shipped LC550404514US
#41 M6 Deep Tail Kit $52 Long RunTime paid shipped 9114999944238373464670
#42 M6 Deep Tail Kit $52 AndyF MO received shipped 91149999442383735273526477
#43 M6 Deep Tail Kit $52 Darien paid shipped 9505511149175167552265
#44 M6 Deep Tail Kit $52 opusdei1962 paid shipped 9500111144965215557401
#45 M6 Deep Tail Kit $52 David T paid shipped 9505513808435223002487
#46 M6 Deep Tail Kit $52 David T paid shipped 9505513808435223002487
#47 M6 Deep Tail Kit $52 Dennis Atencio paid shipped 9505513808435282033354
#48 M6 Deep Tail Kit $52 M6 mania paid shipped LC550834496US
#49 M6 Deep Tail Kit $52 GusManB paid shipped 9505513717666102340421
#50 M6 Deep Tail Kit $52 1pt21 paid 95001138084171010694875

-----------------------
#01 PVC tube only (Without Tailcap) $10 dsche paid shipped 9114901159815876963072
#02 PVC tube only (Without Tailcap) $10 m4a1usr paid shipped 9114901159818832566362

----------------------
Please find link of my other products and click on each link you are interested on.
-----------------------

(NOT AVAILABLE)
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,538
Location
California
HOW much longer is this compared to the original tailcap?
About 10mm longer.


Can I also use my original switch or do I need a McClicky?
You can NOT use original switch.
You will need either McClicky or AW's soft start at your choice.



OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?
This will give you 8.4 volt which is not suitable for WA1185
WA1274 is an excellent match but lower output.
Slightly bleeded cells can be used with 5761


Can you say if this tailcap would work with 6x17500 battery holder ($38) from this topic?
Sorry, nothing is available from closed threads.
Please click
here and find blue link of currently available items.
Item pictured in post #1 of this thread is to use with 2 IMR 26500 cells, 2 unprotected 25500 or 2 protected 25530.


Is the PVC tube necessary?
Inside diameter of M6 is about 37mm while diameter of 26500 cell is about 26mm and in order to keep the cells center, PVC tube is needed.

If I wanted a tail cap with a McClicky and tube, the grand total would be $68 shipped inside of California?
Each tail cap with installed McClicky and PVC tube is $52 and shipping to Stats is $6 so grand total will be $58

I can clearly hear the spacer moving.
Some included foam will stop the spacer tube from moving.

I guess you don't have any more PVC tubes for these?
also what color are these? It's kind of hard to tell on my screen.

Sorry, no extra PVC but each kit comes with one PVC tube.
Tail cap is natural/grey HA pretty close to match M6 body.


is there a difference between using a 26500 button top and non button top batteries? AW no longer makes 26500's.
When using protected batteries such as these current capability wouldn't be as good as IMRs but good to use with LEDs and low current incand bulbs.

Do you have the PVC tube, if I buy one M6 Deep Tailcap with Switch?
Each M6 Deep Tailcap with Switch for $52 comes with one PVC tube.

this kit will not work with the 26650 size battery.
Please note that M6 original battery holder has length of about 93mm while 2x26500 is about 100mm and 2x26670 is about 140mm long.
2x26500 won't fit in standard M6 unless using extension tube or deep tail cap pictured on post #1 of this thread.
Obviously, there is no possibility of accommodating 2x26670 in stock M6 and standard tail cap.
M6 2x26650 system is available
here.

before I purchase the entire tailcap kit... Will a Zero Rez momentary/twisty switch work in this?
Above M6 deep tail caps are designed to work with McClicky switch or AW's soft start switch and I can't guarantee work with mentioned or any other switches.

What bulbs work best with this cap? Ok to use the stock ones?
MN20 will work fine.
Do not use MN21 or accept the high risk.
If you have FM bi-pin socket, WA1274 is reliable with fair output.
 
Last edited:

Steve in SoCal

Enlightened
Joined
Sep 28, 2009
Messages
307
Thanks for making these.:grin2:

I'll take

#01 M6 Deep Tail Kit with installed clickie

$52 + $6 = $58

:paypal:
 
Last edited:

djans1397

Flashlight Enthusiast
Joined
Jul 23, 2007
Messages
1,356
Location
Bozeman, Montana
REALLY COOL!

I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

Can I also use my original switch or do I need a McClicky?

OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

Thanks much and I'll likely get one anyway, just had a few ?'s

Dan
 

Bob96

Enlightened
Joined
Jan 13, 2010
Messages
203
Paypal Sent for #2 M6 - Deep Tail Kit with McClicky
$38 + $14 + $6 = $59
Thanks,
Bob96
 

jdriller

Flashlight Enthusiast
Joined
Feb 9, 2003
Messages
1,059
Location
New York
:paypal:
This is for #05 M6 Deep Tail Kit
$52 with installed McClickie switch.
Extra black boot $1 each
Extra orange boot $1 each
Extra GID boot $1 each
Shipping $6 = $61
Thanks, V
 

djans1397

Flashlight Enthusiast
Joined
Jul 23, 2007
Messages
1,356
Location
Bozeman, Montana
REALLY COOL!

I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

Can I also use my original switch or do I need a McClicky?

OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

Thanks much and I'll likely get one anyway, just had a few ?'s

Dan


Hello? Does anyone know the answers to my questions? :confused:

Thanks,
Dan
 

jdriller

Flashlight Enthusiast
Joined
Feb 9, 2003
Messages
1,059
Location
New York
REALLY COOL!

I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

About 1/2 inch

Can I also use my original switch or do I need a McClicky?

Need McClicky or soft start

OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

This is 8.4v. It won't be as bright as the 3x17670's (12v)

Thanks much and I'll likely get one anyway, just had a few ?'s

Dan
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,538
Location
California
HOW much longer is this compared to the original tailcap?
About 10mm longer.


Can I also use my original switch or do I need a McClicky?
You can NOT use original switch.
You will need either McClicky or AW's soft start at your choice.



OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?
This will give you 8.4 volt which is not suitable for WA1185
WA1274 is an excellent match but lower output.
Slightly bleeded cells can be used with 5761 (Soft start is necessary)
 

djans1397

Flashlight Enthusiast
Joined
Jul 23, 2007
Messages
1,356
Location
Bozeman, Montana
Thanks jdriller and FM. I was hoping for longer runtimes with this set up for my 1185. I'll have to respectfully pass on this at this time. Always good to see new products from you though FM! Keep up the awesome work you do:thumbsup:

Dan
 

Steve in SoCal

Enlightened
Joined
Sep 28, 2009
Messages
307
Hi Folks,
These deep tail caps are CNC machined from solid aluminum bar ... to accept 2 AW's IMR 26500, 2 AW's protected "C" cells or 25530 cells.

FiveMega thank you for another great product. The cells recommended above vary in length a bit with some 50mm in length and some 53/54 mm in length. What is your recommendation for best fit?
 

Bob96

Enlightened
Joined
Jan 13, 2010
Messages
203
Received my M6 kit = Super fast shipping. High quality item. Looks great and fits perfectly in my M6.
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,538
Location
California
FiveMega thank you for another great product. The cells recommended above vary in length a bit with some 50mm in length and some 53/54 mm in length. What is your recommendation for best fit?

[size=+1]Switch spring and lamp spring will compensate length difference.
Obviously protected (longer) cells will compress springs harder.
Each bulb may react and perform differently with different chemistry cells and you need pick best for your needs.[/size]
 

Iliger

Newly Enlightened
Joined
Sep 28, 2008
Messages
144
Location
Moscow, Russia
FM,
I'm planning to use this tail cap with your 6x17500 serial or 3P/2S holder. Will it work? What do you think?
 

RichS

Flashlight Enthusiast
Joined
Oct 22, 2007
Messages
1,509
Location
USA
Ooooh, very nice. :party: Would be great with an IMR-M3T (2.4A). Awesome beam, ~700 lumens, almost an hour of runtime...

Need to free up funds for this one....:huh::huh::huh:
 

ShineOnYouCrazyDiamond

Flashlight Enthusiast
Joined
Aug 18, 2009
Messages
4,442
Location
CT, USA
Ooooh, very nice. :party: Would be great with an IMR-M3T (2.4A). Awesome beam, ~700 lumens, almost an hour of runtime...

Need to free up funds for this one....:huh::huh::huh:

IMR-M3T is 3.4A - so not quite an hour, maybe 40 minutes.

FM - this is a really nice product. Thinking about a purchase.
 

Latest posts

Top