LightKnife
Newly Enlightened
- Joined
- Oct 18, 2008
- Messages
- 74
I've checked malkoff's website and didn't find the M30 but i seen a couple at the BST, are these no longer available? I need one for a C2 with 17670 set up.
Malkoff M30 where to get it?
- Thread starter LightKnife
- Start date
Help Support Candle Power Flashlight Forum
- Status
Sgt. LED
Flashaholic
E-mail gene and ask him to make you one.
Or a PM would do.
They have never been on his site, they are special order items! Quite worth asking for.
Or a PM would do.
They have never been on his site, they are special order items! Quite worth asking for.
LightKnife
Newly Enlightened
- Joined
- Oct 18, 2008
- Messages
- 74
Thx for the quick reply :twothumbs
LightKnife
Newly Enlightened
- Joined
- Oct 18, 2008
- Messages
- 74
M30 allows for 1 cell operation up to 4.5v so enabling the use of 18670 or 17670 while the M60 needs 2 cells up to 9v where us if you used a single cell the drop-in would perform out of regulation.
cernobila
Flashlight Enthusiast
Mine says 1V-5.5V.....and yes simply ask Gene for one.....first class product......btw, it will also work on a CR123 cell and RCR123 as well.
schiesz
Flashlight Enthusiast
You guys are forgetting the MAIN purpose of the M30 (at least for me), getting it to work in a 3P! I love my 3P with the M30.
cernobila
Flashlight Enthusiast
.......and works very nicely on my E1E body with the step-up adaptor to take the C head.....funny looking with the big head and tiny body.
Rat6P
Enlightened
- Joined
- Jun 25, 2007
- Messages
- 319
The first run so to speak, have a max voltage of 4.5v.
The newer ones are slightly higher.
Sgt. LED
Flashaholic
That's right.
Mine is the 1st run type, but I am not sure why he changed it.
Mine is the 1st run type, but I am not sure why he changed it.
Carpenter
Enlightened
metlarules
Flashlight Enthusiast
- Joined
- Jan 30, 2008
- Messages
- 1,027
How long does this m30 run on a 17670?
schiesz
Flashlight Enthusiast
I did a runtime on a RCR123 posted here. Extrapolate for 17670...
RCR123 750 mah vs 17670 1600 mah...Should be about twice the runtime (1 hr) I would think.
I just realized that someone else posted 17670 runtime in that same thread just after my post.
1 hour 19 minutes, not too shabby.
RCR123 750 mah vs 17670 1600 mah...Should be about twice the runtime (1 hr) I would think.
I just realized that someone else posted 17670 runtime in that same thread just after my post.
1 hour 19 minutes, not too shabby.
Last edited:
cernobila
Flashlight Enthusiast
When I get home I will be running my M30 on the 17670 in my E2E body for the extra run time.
Sgt. LED
Flashaholic
Can't wait for that Leef 1X18650 body to show up!
That's going to be real nice for my M30. +/- 2 hours.
That's going to be real nice for my M30. +/- 2 hours.
cernobila
Flashlight Enthusiast
Can't wait for that Leef 1X18650 body to show up!
That's going to be real nice for my M30. +/- 2 hours.
Agree 100%, solid well made shell with built in collar to stop the 18650 cell from hitting the M30 LED unit if the light is dropped.......good run time with regulation......and one heck of a light source with good balance of throw and spill......just got to make up your mind if you are going to have the plain bezel ring or the pointy one
brighterisbetter
Flashlight Enthusiast
schiesz
Flashlight Enthusiast
Although it just looks like a normal 3P now, mine has played dress up before as well...
It really is best if you just leave it in its normal config (with the M30 though, of course).
It really is best if you just leave it in its normal config (with the M30 though, of course).
etc
Flashlight Enthusiast
Explain, I wasn't aware you could put M30 in E2E....?? what Bezel are you using?
schiesz
Flashlight Enthusiast
- Status
