I am thinking of getting some McLux powerpacks 3X123 from the sandwich shoppe, and putting out a feeler to see if anyone is willing to cut and tread them into 1X123 and 2X123 powerpacks. The thing is why, these two powerpacks r almost near impossible to find, every so often the come and go on the B/S/T but there's tons of people going for them and i always seems to be missing out, so is there anyone willing to help, Thanks.
Mod to McLux Powerpack
- Thread starter flashworm
- Start date
gadget_lover
Flashaholic
I would be willing to try, but I would not gaurantee any kind of results. I'm still a novice when it comes to machining. You can figure that I'll mess up 50% of what I try.
Most recently I cut a perfect set of threads on a body.... except that the male part's outer thread diameter perfectly matched the female part's inner diamter. That makes 0% thread engagement which is NOT a good thing.
Daniel
Most recently I cut a perfect set of threads on a body.... except that the male part's outer thread diameter perfectly matched the female part's inner diamter. That makes 0% thread engagement which is NOT a good thing.
Daniel
