Modded finally:Fulton Industries MX--991/U

[Nitroz]

Parts Used
1 MicroPuck #2009A-SHO, 500mA
Heat sink from DX mag reflector
U2SVOH Seoul
37mm x 26mm cutdown Aurora reflector

Now if I could just find a 43mm lens I would be set. Time for some pictures.

Perfect focus.

Reflector and HS epoxied together.

Micropuck tucked into the heat sink.

Assembled

Beam profile shots ISO400 1/160th

ISO400 1/15

ISO400 1/13

The tint is beautiful and I would say that it is somewhere close to 100 lumens out the front. The Anglehead is an excellent light to own once modded.

 

[datiLED]

That is a nice, clean mod. The beam shots look good. It should run for a very long time on two D-cells.

I have a vintage Boy Scout angle head flashlight that is going to get a makeover. It is all metal, so I am going to drive it a little harder than 5oomA.

 

[Nitroz]

That is a nice, clean mod. The beam shots look good. It should run for a very long time on two D-cells.

I have a vintage Boy Scout angle head flashlight that is going to get a makeover. It is all metal, so I am going to drive it a little harder than 5oomA.

Thanks! Now if I can work some magic on the old Rayovac sportsman like you have done on some of the oldies.

 

[Nitroz]

I have a vintage Boy Scout angle head flashlight that is going to get a makeover. It is all metal, so I am going to drive it a little harder than 5oomA.

I'll keep an eye out for this one.:popcorn:

 

[65535]

Hey nitroz what's the story on that pin vise?

 

[LLCoolBeans]

Hey nitroz what's the story on that pin vise?

I've been meaning to order one of those too. You can get them from Garret Wade.

http://www.garrettwade.com/an-inval...ate-work-at-home-or-in-the-shop/p/93K04ddd01/

 

[Nitroz]

Hey nitroz what's the story on that pin vise?

It's a Jewelers tool and can be found here for $11.50. Not sure about the shipping cost.

This tools is invaluable and I noticed that Darkzero was using one and just had to have one. To bad owning one does not give me the super modding powers like DZ. :)

 

[LLCoolBeans]

Oooh, that's less than half the price GW charges and it looks like the exact same tool. Good thing I didn't complete that GW order. Thanks Nitroz.

 

[Nitroz]

Oooh, that's less than half the price GW charges and it looks like the exact same tool. Good thing I didn't complete that GW order. Thanks Nitroz.

Excellent! Glad I could help out, every penny counts these days.:twothumbs