Multiple emitters help

[allburger]

Ok, So what i'm trying to do is run 3 cree emitters off of a 2.8a mc-e or p7 driver.http://www.dealextreme.com/details.dx/sku.20330

How do I wire these.

Series or parallel.

I am assuming parallel, but how do you do that.

 

[Justin Case]

To wire three Cree LEDs in parallel, connect all of the + leads together. Also connect all of the - leads together. Then run the combined + leads to LED+ on the driver board, and run the combined - leads to LED- on the driver.