entoptics
Enlightened
- Joined
- Oct 1, 2009
- Messages
- 388
Describe it in as few words as possible. Hopefully a few manufacturers will wonder in here and take notice. Anything goes though, as long as it's feasible. No 2000 lumen AAA unobtanium lights here. Keep it to the limits of existing technology.
I'll start (based on my limited experiences of course).
Have fun, but keep your responses simple enough to read through.lovecpf
I'll start (based on my limited experiences of course).
- NiteCore D10 Size (smaller is not good in the hand, bigger is not good in the pocket)
- AA Battery but 14500 capable
- Sturdy, deep cary pocket clip (D10, Ra, LiteFlux, etc)
- 150ish lumens for ~1 hour
- 1 lumen or less low mode
- "Clicky" (piston drive is fine, but no flakey behaviors allowed)
- "Floody" (Quark XPG or NiteCore D10 floody. 5 foot hotspot at 20 feet give or take)
- Good spill
- White emitter (EagleTac White)
- D10 "ramping" interface, but instead of a slow "infinite" ramp, 5 discrete brightness levels (double click = low, click hold = max, press hold = cycle through brightness levels) Levels = 1 lumen, 10 lumen, 50 lumen, 100 lumen, 180 lumen
- Twisty activated beacon mode (tight/loose/tight = 0.5 hz blink at 100 lumens)
- Programmable to get the last two items or any other that a person wants?
Have fun, but keep your responses simple enough to read through.lovecpf