Metatron
Banned
https://www.candlepowerforums.com/threads/218467
usual rules apply folks
$700 delivered $680
paypal only
(not responsible for damage or loss once item has left my care)
thanks for looking folks
Last edited:
You can become a Supporting Member.
Cree XRE R2 WD - thats all the info i have mate, led zep may like to chime in here:wave:What a beauty! Do you know the bin of the Crees?
what u see in the pic plus original parts plus battery holder for what u see in the pic.Does that include the M6 host, or just the head/bezel?
Thanks,
-John
What a beauty! Do you know the bin of the Crees?
Cree XRE R2 WD - thats all the info i have mate, led zep may like to chime in here:wave:
This is very tempting :devil: What's the runtime on high with AW IMR 18650 cells?
I can't tell from the picture if it comes with a stock M6 body or a Megalenium body. If it's a stock body, what type of battery carriage does it come with?
This is very tempting :devil: What's the runtime on high with AW IMR 18650 cells?
Joel, I was running mine with a Megalennium body and regular AW protected cells. At 11.1V it will draw about 3A.
At 1600 mAH, the AW IMR 18650 should power the light for about 30 minutes.
One thing to note is that this light is the very first MZ build. The (+) contact design has since been revised to be adjustable to match with different bodies and cell holders (this one is fixed for the M6 tube and FM 3 X 17670 holder). As is it will probably not work on the Megalennium, but I believe I can install a spring soldered to the brass contact so it will. If the light is disassembled to fit a Remora, I can change the entire (+) contact board to the current adjustable style.