Need help from you smart people! What driver board do I use for my project?

[KDOG3]

I have a LumensFactory D36 on the way to go into my M3head/M4 body hybrid. But I'm sure the driver board well, sucks, so I would like to change it to one that was much more efficient, reliable and with more features. I would love to find one that I can setup a Hi/Med/Low.... I'd like High to be of course max current output maybe 1.1a, then medium to be around 50 lumens and then low to be a nice LOW low, around 3 lumens. Is this possible? What board would you recommend?

Well theres' another problem for me as well I just don't know if I can solder the wires to the board anymore, my eyes just don't want to focus on that small stuff anymore. I can handle soldering emitter leads and contact springs, etc. Is it possible to get a good driver with the wires already connected to the board?

I appreciate any help I can get with this!

 

[Nitroz]

Have you considered a Flupic?

You can adjust the Low, medium, and high. You can also have strobe and SOS, but you don't have to use them if you do not want to.

What will be your power source?

 

[Nitroz]

Here is a guide to the Flupic settings.
http://www.candlepowerforums.com/vb/showpost.php?p=1480970&postcount=1

 

[KDOG3]

Have you considered a Flupic?

You can adjust the Low, medium, and high. You can also have strobe and SOS, but you don't have to use them if you do not want to.

What will be your power source?

My power source will be 2x17670s' or 4 primaries...

What does it look like? (need to see if it will fit in the heatsink the D36 has, should be here Wed.) Is it possible to order it with the wires already attatched?

 

[Nitroz]

My power source will be 2x17670s' or 4 primaries...

What does it look like? (need to see if it will fit in the heatsink the D36 has, should be here Wed.) Is it possible to order it with the wires already attatched?

Your power source rules out the Flupic. Hmmmmmm...

 

[Nitroz]

My power source will be 2x17670s' or 4 primaries...

What does it look like? (need to see if it will fit in the heatsink the D36 has, should be here Wed.) Is it possible to order it with the wires already attatched?

The dimension will help decide what will work for you.