Need help with charging situation

[JJay03]

I currently have this charger hyperion 0720i which will charge li-ion
http://media.hyperion.hk/dn/eos/EOS0720NET-MAN-EN12.pdf
I want to get some rcr123 and 17500 batteries and charge them using that charger. Need help finding some cell holders and the best way to wire this up.
Supposely these will fit the rcr's http://www.alliedelec.com/Search/productdetail.aspx?SKU=839-1029&R=839-1029&sid=47C74B00136E17F
But I need somethin for the 17500's also. Help I want to use this charger it should work great if I just get it all wired up correctly.

 

[yellow]

too much of a hassle + that thing is best for battery packs (voltage + charge current).

For single cells, get something like this here:
http://www.lighthound.com/Ultrafire...3-37-volt-Lithium-Battery-Charger_p_2279.html
double slot multicell Li-Ion charger.

 

[AlexLED]

Ah, once again, somebody searching for a 18650 holder ... :wave:

I partially agree with yellow, there is no easy solution or product for this.
I built my own holder by ripping out the electronics of a cheap All-in-One charger, see this thread:
http://www.candlepowerforums.com/vb/showthread.php?t=202770

(Btw: here's the updated link: http://www.kaidomain.com/ProductDetails.aspx?ProductId=2717
)

 

[JJay03]

Thanks Alex I did the same thing for my ryobi batteries. I might just buy an all in one charger for now.

 

[AlexLED]

... I might just buy an all in one charger for now.

To mod or to charge ?
Bare in mind that the charger I pointed out cranks out only about 230mA for Li-Ions, so it'll take about 10hrs to charge one 17500....

That's why I decided to use only the "mechanics".

 

[JJay03]

Prob just buy 1 of the 18 dollar ones for charging.