New Canister

[PilleLED]

Hello
for the new light head , 3x XML-U2 shardriver 3a
i am on the way to do a new Canister ,,,

what i thinking is the canister from alunatec
http://shop.strato.de/epages/611629...Shops/61162903/Products/"G AT 66 156 190 POM"
with reed

and the cells 14,8V 5,2AH from this one
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=320541324387&ssPageName=ADME:X:eRTM:US:1123
he is telling me ,,he will solder them like i like to have it , and he will instal also a PCM
2x Packs , and conect them to the canister outlet to have 14,8V and 5,2AH
4S 2P

and i will charge with the charger i have
http://www.conrad.com/Voltcraft-Mul...p1}{md5/87ec29b213b979de6905392dba9e74d6/md5}
to charge i was thinking to have 2 conections inside the canister , becouce with this charger i can only 6 cells charge
soooo i make 2 packs


if you have any ideas if that works ,,,,,i think so

best regards

Stefan

 

[Codiak]

Check with 350xFire about canister offerings from tlslights.com

 

[350xfire]

I would be very careful with those cells because they seem extremely cheap! My canister can hold 8 18650 very easily and 10 with a small connector.
Thanks

 

[betti154]

what i thinking is the canister from alunatec
http://shop.strato.de/epages/61162903.sf/de_DE/?ObjectPath=/Shops/61162903/Products/"G AT 66 156 190 POM"
with reed

and the cells 14,8V 5,2AH from this one
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=320541324387&ssPageName=ADME:X:eRTM:US:1123
he is telling me ,,he will solder them like i like to have it , and he will instal also a PCM
2x Packs , and conect them to the canister outlet to have 14,8V and 5,2AH
4S 2P

If you're going for a 4S2P battery pack, isn't the smaller alunatec canister the right one?

http://shop.strato.de/epages/611629...Shops/61162903/Products/"G AT 48 170 190 POM"