Oiling the threads in the Head..

[neutralwhite]

Hi a question on oiling the head threads with nano oil. thanks.

I know cleaning the threads in there require like a flattened with pliers Q-Tip or so, but how would I then after, oil them with nano oil?.

would oiling the body threads be sufficient enough to like lubricate the head threads as well, or is there a way?.

thanks everyone.

:confused:

 

[TEEJ]

I'm not sure what the question is...you can oil the threads in the head the same way as you'd do the body...or just twist/screw/unscrew the two together until the matching threads have lubed each other up, etc.

You just a mere film of lube to work, so you don't drip stuff on the electronics, etc.

 

[HotWire]

Nano oil is one of my favorites. If you won't be removing or twisting the head much I'd use something thicker like silicone grease. If you twist the head for switching or mode control use the nano oil on a Q-tip or small cloth. I use an old toothbrush to apply lube to clean threads.