ernsanada
Flashlight Enthusiast
- Joined
- Apr 29, 2004
- Messages
- 2,962
I purchased the Olight T25 Tactical from 4 Sevens.com
Shipping is very fast. 3 days to Socal.
Uses a Cree XRE Q5. The tint on my light is very white. Very smooth beam due to it's full OP reflector. The other Olights I have use the hybrid half OP and SMO reflector.
This is the Tactical version which uses a forward clickie. Has momentary on off. Will remember the last setting when shut off. The T25 can be locked out by slightly turning the rear clickie counter-clockwise.
The 3 different light levels, Strobe and SOS can be accesed by turning the bezel counter-clockwise then clockwise. It's a very simple UI.
The finish is Type III Hard Anodize in black. No mis-match of color. The finish is excellent, I give the grade A+.
The fit is excellent. Smooth threads. O-rings lubed. I give the grade A+.
Powered by 2AA batteries.
Voltage: 1.1v - 4.2v. Do not run 2 14500's or you will fry the light!
The Olight T25 uses a clip. The bezel faces up.
Comes with a holster, lanyard, spare o-rings, spare rubber boot.
Pros
Uses common AA batteries.
Very well machined. The fit and finish.
Forward clickie.
Easy UI.
Cons
Wish it had a clip that faced the bezel down.
Price.
Hot spot slightly off centered.
I have always liked Olights. The Olights are always manufactured A+ IMO. I never have had a bad Olight. I have a total of 5 different ones.
___________________________________________
Comes with a holster, lanyard, spare o-rings, spare rubber boot.
Uses a Cree XRE Q5. OP reflector.
Rear of the Cree module.
The front bezel connects to the top of the battery tube.
The clip can be removed by unscrewing the knurled nut. Make sure you take the o-ring off first!
Forward clickie, momentary on off.
Inside view of the rear clickie.
Holster
____________________________________
Size comparisons.
Left to right, Olight T25, Rominsen RC-N3, Fenix E20
Left to right, Olight T25 Q5, Rominsen RC-N3 Q5, Fenix E20 Q2
______________________________________
I also took lux readings of lights shown above. These are the lux readings I got. I am using a Meterman LM631 Light Meter measured at 1 meter. I waited 2 minutes before taking the readings. I am using Duracell 2650 Rechargeable Nimh AA which were fully charged.
Olight T25 Q5 (High) - 4000 lux @ 1 meter
Olight T25 Q5 (Med) - 830 lux @ 1 meter
Olight T25 Q5 (Low) - 170 lux @ 1 meter
Romisen Cree RC-N3 Q5 - 2780 lux @ 1 meter
Fenix E20 Q2 - 2570 lux @ 1 meter
___________________________________
Olight T25 Q5 (High) @ 96"
Left, Olight T25 Q5 (High). Right, Romisen Cree RC-N3 Q5 @ 96"
Left, Olight T25 Q5 (High). Right, Romisen Cree RC-N3 Q5 @ 96" Stepped down exposure
Left, Olight T25 Q5 (High). Right, Fenix E20 Q2 @ 96"
Left, Olight T25 Q5 (High). Right, Fenix E20 Q2 @ 96" Stepped down exposure
Olight T25 Q5 (High) @ 32'
Romisen Cree RC-N3 Q5 @ 32'
Fenix E20 Q2 @ 32' Tight Focus
Fenix E20 Q2 @ 32' Wide Focus
_________________________________________
Olight T25 Q5 (Low) @ 32'
Olight T25 Q5 (Med) @ 32'
Olight T25 Q5 (High) @ 32'
Shipping is very fast. 3 days to Socal.
Uses a Cree XRE Q5. The tint on my light is very white. Very smooth beam due to it's full OP reflector. The other Olights I have use the hybrid half OP and SMO reflector.
This is the Tactical version which uses a forward clickie. Has momentary on off. Will remember the last setting when shut off. The T25 can be locked out by slightly turning the rear clickie counter-clockwise.
The 3 different light levels, Strobe and SOS can be accesed by turning the bezel counter-clockwise then clockwise. It's a very simple UI.
The finish is Type III Hard Anodize in black. No mis-match of color. The finish is excellent, I give the grade A+.
The fit is excellent. Smooth threads. O-rings lubed. I give the grade A+.
Powered by 2AA batteries.
Voltage: 1.1v - 4.2v. Do not run 2 14500's or you will fry the light!
The Olight T25 uses a clip. The bezel faces up.
Comes with a holster, lanyard, spare o-rings, spare rubber boot.
Pros
Uses common AA batteries.
Very well machined. The fit and finish.
Forward clickie.
Easy UI.
Cons
Wish it had a clip that faced the bezel down.
Price.
Hot spot slightly off centered.
I have always liked Olights. The Olights are always manufactured A+ IMO. I never have had a bad Olight. I have a total of 5 different ones.
___________________________________________
Comes with a holster, lanyard, spare o-rings, spare rubber boot.
Uses a Cree XRE Q5. OP reflector.
Rear of the Cree module.
The front bezel connects to the top of the battery tube.
The clip can be removed by unscrewing the knurled nut. Make sure you take the o-ring off first!
Forward clickie, momentary on off.
Inside view of the rear clickie.
Holster
____________________________________
Size comparisons.
Left to right, Olight T25, Rominsen RC-N3, Fenix E20
Left to right, Olight T25 Q5, Rominsen RC-N3 Q5, Fenix E20 Q2
______________________________________
I also took lux readings of lights shown above. These are the lux readings I got. I am using a Meterman LM631 Light Meter measured at 1 meter. I waited 2 minutes before taking the readings. I am using Duracell 2650 Rechargeable Nimh AA which were fully charged.
Olight T25 Q5 (High) - 4000 lux @ 1 meter
Olight T25 Q5 (Med) - 830 lux @ 1 meter
Olight T25 Q5 (Low) - 170 lux @ 1 meter
Romisen Cree RC-N3 Q5 - 2780 lux @ 1 meter
Fenix E20 Q2 - 2570 lux @ 1 meter
___________________________________
Olight T25 Q5 (High) @ 96"
Left, Olight T25 Q5 (High). Right, Romisen Cree RC-N3 Q5 @ 96"
Left, Olight T25 Q5 (High). Right, Romisen Cree RC-N3 Q5 @ 96" Stepped down exposure
Left, Olight T25 Q5 (High). Right, Fenix E20 Q2 @ 96"
Left, Olight T25 Q5 (High). Right, Fenix E20 Q2 @ 96" Stepped down exposure
Olight T25 Q5 (High) @ 32'
Romisen Cree RC-N3 Q5 @ 32'
Fenix E20 Q2 @ 32' Tight Focus
Fenix E20 Q2 @ 32' Wide Focus
_________________________________________
Olight T25 Q5 (Low) @ 32'
Olight T25 Q5 (Med) @ 32'
Olight T25 Q5 (High) @ 32'
Last edited: