jmoyat
Flashlight Enthusiast
Oveready bored 6P, Torchlab Triple and Moddoolar tailcap
Bought this great set up few months ago, haven't used it so it's time to find another owner!
Oveready Custom HA Bored (18650) 6P body with matching z44 bezel. No dings, scapes or scuffs. It is their Custom HA III spec treatment. Body has maybe two specs of ano missing. Bezel has a Xeno AlTin black bezel ring and a UCL lens.
The tailcap is a Moddoolar Triad with a McClicky. I think the boot is Med Press Nuff said.
The drop in is one of the original V 1.0 Torchlab (Moddoo) triples. They were all hand made and potted. Three modes with memory. XP-E emitters give great throw and the triple optic gives great wide flood. It is about 600 lumens and runs on One Li Ion not made for two. So it has pretty good run time as well as it is not super over driven. Great piece. It is Neutral White and not cool. There were about 10 of them made. I posted the drop in specs below. As stated above all of these drop ins were hand made with attention to fine detail. The lens on this one is clear. The fit is super snug like a glove in the host. It really is a spectacular white beam with great XP-E Throw but massive triple LED flood as well. It is a 3 mode LMH with memory.
Features:
?Multiple independent LEDs for more output than conventional designs
?LEDs are soldered directly to copper
?Compatible with all 3.0-5.5 volt Surefire P and C series lights
?3 levels on most models, for just the right output
?Fully potted electronics for durability
?Arctic Silver 5 thermal compound is used between the copper and aluminum
?Solid aluminum heatsink fits snugly inside the light for maximum heat transfer
?Hard anodized black for superior thermal emissivity and durability
?Custom built solid copper LED mounting plate
?3 screws clamp the copper directly to the heat sink
?24 gauge mil-spec wire with 19 strand, silver-plated copper conductors, teflon insulated
?Moddoo Triple XP-E
?High performance drop-in for P60/D26 applications
600 lumens from a single rechargeable battery
3.0-6.0 volts only, not for use with 2+ lithium cells*
Terms:
*Ask questions in PM first then commit.
*Clear unconditional "I'll take it" takes priority over any other forms of communication or PM.
*Please plan to pay fast as I ship fast. So plan to pay at time of commitment to purchase. I will PM you with PayPal.
*Shipping and fees are included in price. CONUS only, no trades thanks!
PRICE $250.00
List Date: 4/29/2015
For more info, click here to view the original listing: Oveready bored 6P, Torchlab Triple and Moddoolar tailcap
--------------------------------------
SOLD
--------------------------------------
Bought this great set up few months ago, haven't used it so it's time to find another owner!
Oveready Custom HA Bored (18650) 6P body with matching z44 bezel. No dings, scapes or scuffs. It is their Custom HA III spec treatment. Body has maybe two specs of ano missing. Bezel has a Xeno AlTin black bezel ring and a UCL lens.
The tailcap is a Moddoolar Triad with a McClicky. I think the boot is Med Press Nuff said.
The drop in is one of the original V 1.0 Torchlab (Moddoo) triples. They were all hand made and potted. Three modes with memory. XP-E emitters give great throw and the triple optic gives great wide flood. It is about 600 lumens and runs on One Li Ion not made for two. So it has pretty good run time as well as it is not super over driven. Great piece. It is Neutral White and not cool. There were about 10 of them made. I posted the drop in specs below. As stated above all of these drop ins were hand made with attention to fine detail. The lens on this one is clear. The fit is super snug like a glove in the host. It really is a spectacular white beam with great XP-E Throw but massive triple LED flood as well. It is a 3 mode LMH with memory.
Features:
?Multiple independent LEDs for more output than conventional designs
?LEDs are soldered directly to copper
?Compatible with all 3.0-5.5 volt Surefire P and C series lights
?3 levels on most models, for just the right output
?Fully potted electronics for durability
?Arctic Silver 5 thermal compound is used between the copper and aluminum
?Solid aluminum heatsink fits snugly inside the light for maximum heat transfer
?Hard anodized black for superior thermal emissivity and durability
?Custom built solid copper LED mounting plate
?3 screws clamp the copper directly to the heat sink
?24 gauge mil-spec wire with 19 strand, silver-plated copper conductors, teflon insulated
?Moddoo Triple XP-E
?High performance drop-in for P60/D26 applications
600 lumens from a single rechargeable battery
3.0-6.0 volts only, not for use with 2+ lithium cells*
Terms:
*Ask questions in PM first then commit.
*Clear unconditional "I'll take it" takes priority over any other forms of communication or PM.
*Please plan to pay fast as I ship fast. So plan to pay at time of commitment to purchase. I will PM you with PayPal.
*Shipping and fees are included in price. CONUS only, no trades thanks!
PRICE $250.00
List Date: 4/29/2015
For more info, click here to view the original listing: Oveready bored 6P, Torchlab Triple and Moddoolar tailcap
--------------------------------------
SOLD
--------------------------------------
Last edited: