If we are lucky, maybe Pelican will distribute new reflectors..
1- unscew front bezel
2-Reveals hold down disc with hex cutout and Luxeon Star underneath
3-A 3/8 inch nut fits in the cutout and leaves room for the LED
4-The 9/16 socket is used to unscrew disc
5-After the disc comes out a bit, switch to a bolt to complete the removal.
6-The Star is mounted on a steel disc. Simply push the whole assembly up through the battery tube
7-Switch side of assembly
8-Housing with switch still in place
9-Housing with switch removed
10-Circuit, switch and LED assy.
11-Circuit. Philips chip says, "EA12081 - 3L518 - n4191" I think.
1- unscew front bezel
2-Reveals hold down disc with hex cutout and Luxeon Star underneath
3-A 3/8 inch nut fits in the cutout and leaves room for the LED
4-The 9/16 socket is used to unscrew disc
5-After the disc comes out a bit, switch to a bolt to complete the removal.
6-The Star is mounted on a steel disc. Simply push the whole assembly up through the battery tube
7-Switch side of assembly
8-Housing with switch still in place
9-Housing with switch removed
10-Circuit, switch and LED assy.
11-Circuit. Philips chip says, "EA12081 - 3L518 - n4191" I think.
Last edited: