SF E-series cell extender PLEASE :D
- Thread starter kungfumo
- Start date
Help Support Candle Power Flashlight Forum
Bullzeyebill
Flashaholic
Welcome to CPF. Did you google (not CPF Google) Surefire battery extender? Try Surefire A19? Check out LA Police Gear.
Bill
Bill
I don't believe there is a factory E series extender and the A19 is the extender for the C series bodies.
There are single cell bodies for the E series at the LEDGuy (McGizmo's Aleph?) website, but you will likely need additional bodies for additional capacities.
Definitely look at LEEF bodies at Lighthound's website for multi-cell bodies which allow Surefire E heads with C tailcaps. With the LEEF bodies you could also use the Surefire A19 single cell extender (realize these Surefire extenders are not HAIII and only available in black [like the 6P/9P series]).
There are single cell bodies for the E series at the LEDGuy (McGizmo's Aleph?) website, but you will likely need additional bodies for additional capacities.
Definitely look at LEEF bodies at Lighthound's website for multi-cell bodies which allow Surefire E heads with C tailcaps. With the LEEF bodies you could also use the Surefire A19 single cell extender (realize these Surefire extenders are not HAIII and only available in black [like the 6P/9P series]).
Boltgun
Newly Enlightened
I dont have extenders but I do have a few extended bodies available. You can see them here:
http://www.candlepowerforums.com/vb/showthread.php?t=149896
you cannot extend the body from the rear unless you machine the battey stop from inside. this would be a permanent mod.
Boltgun
http://www.candlepowerforums.com/vb/showthread.php?t=149896
you cannot extend the body from the rear unless you machine the battey stop from inside. this would be a permanent mod.
Boltgun
Thanks guys, I looked around and saw a extender that went onto the front of the body, but could not find out who made it or where to purchase it. I may just buy another body in 2 cell configuration.
Maybe some one will know.
I tried google and couldnt find anything. Even sleazebay didnt have anything.
:mecry:
Maybe some one will know.
I tried google and couldnt find anything. Even sleazebay didnt have anything.
:mecry:
KeyGrip
Flashlight Enthusiast
As boltgun says, it's going to be difficult to do because of the way the E series body is machined. I suggest getting an aftermarket 3 cell body.
Bullzeyebill
Flashaholic
My apologies, I overlooked your reference to E extenders, thinking of the A19, and after market C series extenders instead. I do have an extender for the E series, made by DSpeck, I believe, it fits in front of the existing body. Diameter is larger than an E series body, and it does not look that great, but matches most natural SF finishes. It was hiding that last time I looked for it.
Bill
Bill
Rogue_monkey
Enlightened
I manged to find one on here once. It treads on the front of the light like stated. I can't remember who I bought it off of, how much I paid or even why I bought it for that matter.
Rothrandir
Flashaholic
Hey guys, I've got some at the anodizer right now.
Not a very good picture, but it's the only one I've got at the moment, and it at least gives you some idea.
I'm hoping to have them ready in about 2 weeks, but dealing with outside work is always an exercise in patience.
Not a very good picture, but it's the only one I've got at the moment, and it at least gives you some idea.
I'm hoping to have them ready in about 2 weeks, but dealing with outside work is always an exercise in patience.
Rothrandir
Flashaholic
Not sure on price yet, but probably about $30. They do go on the front, and of course stack together.
