Shotgun light!

Candle Power Forums

Help Support Candle Power:

viper37

Newly Enlightened
Joined
Feb 18, 2012
Messages
26
Can someone steer me in the right direction for a shotgun light? Shock resistance is paramount as it is going on a Semi Automatic shotgun.

1) How would you prefer to purchase the light?

____I would like to purchase the light from a brick and mortar store. I am located in ______________.
X____I will be mail-ordering or buying online, so this doesn't matter.


2) Budget: An easy question, but you may change your mind after answering the rest! :-)

____Less than $25.
____Less than $50.
____Less than $100.
X____Less than $150.
____Less than $300.
____I have no limit.
____I’m flexible, tell me what you gotJ.
____Other, please specify ________


3) Format:

X____I want a flashlight.
____I want a headlamp.
____I want a lantern.
____I want a dive light.
____I want a portable spotlight.


4) Flashlight-specific format/size:

____Keychain size.
____Every day carry small (2-4 inches).
____Every day carry medium (4-7 inches).
____Holster carry.
____Big enough to need its own travel caseJ.
____I don’t care.
____I don’t know.
X____N/A


5) Emitter/Light source:

X____LED (known for efficiency, longevity, and compactness)
____Incandescent (known for superior color rendition)
____HID (known for max output, but often at the expense of size)
____I don't know.


6) Manufacturer:

X____I want to buy a light from a traditional mass producing manufacturer that is ready to go out of the box.
X____I would consider getting a light that is pieced together (for example a “host” or flashlight body from one manufacturer, and a “drop-in” emitter from another source). Under the right circumstances, this path can provide more options to the consumer to meet specific needs, and can often be easily upgradeable as technology improves.


7) What battery type do you want to use?

____I intend to use alkaline batteries (AAA, AA, C, D) (disclaimer, while it does not preclude all choices, these are not recommended for many of today’s most powerful lights)
____I intend to use rechargeable nickel chemistry (NiCad, NiMH, NiZn)
X____I intend to use lithium primary batteries (CR123, CR2, Energizer Advanced/Ultimate Lithium AA/AAA)
____I intend to use rechargeable lithium (li-ion) chemistry. Feel free to specify a size if you know which size you want (14500, RCR123/16340, 17500, 17670, 18650, etc.)
____I want a light with an integrated rechargeable battery. (Note: these choices may be very limited unless you are looking at spotlights)


8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is impossible).

____I want to navigate a dark room or read a map (0-10 lumens).
____I want to walk around an unlit rural area (50-150 lumens).
X____I want to illuminate my entire backyard or a campsite (150-300 lumens).
____I want to illuminate an entire field, the neighbor's front yard several houses down, impress my friends and neighbors, etc. (300-700 lumens).
____I want ridiculous amounts of lumens (800+ lumens).


9) Throw vs. Flood: At what distance will you be most likely to use this light? Select all that apply.

____Less than 1 yard/meter (reading, other close work)
____Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
X____5-20 yards/meters (check out a noise in the backyard)
____30-50 yards/meters (I have a big backyard)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)
____150+ yards (I want maximum throw possible)


10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum output).

X____Up to 30 minutes (I want the brightest [and potentially smallest] light for brief periods)
X____30-60 minutes (I have plenty of batteries just ready to be changed)
____90-120 minutes (Runtime is moderately important, but still not critical)
____3 hours + (I critically need this light to run on max for extended periods in between battery changes/charges).


11) Durability/Usage: Generally the old phrase “you get what you pay for” is very accurate for flashlights.

____Not Important (A “night-stand” light).
____Slightly Important (Walks around the neighborhood).
____Very Important (Camping, Backpacking, Car Glove-box).
X____Critical (Police, Fire, Search & Rescue, Caving, Survival).
____I don't care.
____I don’t know.


12) Switch Type and location (choose all that apply):

____I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
____I want a momentary switch (Predominantly for use with signaling and short bursts of momentary light only).
____I want a twisty switch (Tighten the head/tailcap to activate, and the light will stay on until the head/tailcap is loosened).
____I want a body mounted switch (near the head, like on a Maglite).
____I want a tail mounted switch (found on the majority of today’s high end lights).
____I don't care.
____I don’t know.
X____Other, please specify__Remote pressure switch to mount on the grip of my shotgun__________________.


13) User Interface (UI) and mode selection. Select all that apply.

____A simple on-off with only one output level is fine for me.
____I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
____I want multiple light levels. (Some lights have 5-16 light levels.)
____I want a programmable light.
____I want a selector ring.
____I want a strobe mode. (Blinks to show location.)
____I want SOS mode.
____I want a beacon mode.
____I don’t care.
x____I don’t know.


14)Material/Finish/Coating

____Plastic/composite body (this may limit your choices significantly).
____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today’s flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).
x____I don’t care.
____I don’t know.
____Other, please specify____________.


15) Special Needs/extras: Is there anything else you want or need that hasn't been mentioned? Select any below.

____Red filter (for preserving night vision).
____Other filter colors (Amber, Green, Blue, _________).
____Dedicated R/G/B secondary LEDs.
____“Hybrid” light (bright incandescent combined with long running LEDs)
____Pocket/belt clip
____Holster
____Wrist/Neck Lanyard
____Crenulated bezel
____Non-sparking Intrinsically Safe (IS) for use in explosive environments

Thanks!
 
What make and model is your shotgun? Are there any rails for mounting the light? Are you looking to replace the forend?
 
We use the Surefire forend light on our Remington 870s. After thousands of rounds in over a hundred guns (here at the range) they have proven extremely reliable, though the momentary switches have a tendency to break down...We throw tape over them and they just keep going. I know the forend lights are more expensive but you get what you pay for!

Another option would be a Surefire X300 with a rail mount (either installed on the forend using creativity and drills or on the magazine tube)...I've put over 5000 rounds each (and getting close to 10k on one) through two X300s mounted on pistols, and they are again extremely reliable, but not super cheap either.

Lastly, I'd look into high quality weapon-rated lights such as the Quark Maelstrom or Eagletac T20C2. I threw a Maelstrom around the range on concrete a bunch and it held up better than I'd ever expect, though recoil forces on a 12ga shotgun are strong. You'll need a good light mound and again a rail. I really like my T20C2, but I don't have the guts to throw it around or strap it to an 870.

Honestly, while the Streamlight TLR series and other brands of weapon-lights seem to be "ok" for handguns, I've seen enough of them come loose and fly off handguns in the middle of a string of fire to think I'd avoid them on a heavier recoiling shotgun.
 
+1 For the Surefire forend light. I have one on my personal 870 and I couldn't be happier with it. It's bright, durable, has good controls, and the weight helps add to the overall balance of the gun. I've put a few thousands rounds through the gun with light installed and it hasn't stopped working yet. For the record I have the Surefire 618 LMG.
 
I use Streamlight TLR-1 on my handgun and 870. The 870 has a mount on the mag extension tube and the light clamps right on to it. Never had it come loose and it is easy to reach with fingers. These lights are rated at 130 lumens (I think) but seem to be much brighter. Glass lens. Good beam. Light, compact, robust. $99
 
I have rails on my shotgun, and as it is semiautomatic an off the shelf fore end light is out. I should have said this before, but I really think I'm looking for more of a clamp solution as it will get it further towards the muzzle. I have an Escort MP-A. Said shotgun:
2012-06-21_20-20-19_601.jpg
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.

Latest posts

Back
Top