Solarforce L2M Switch help please...

[Parky50]

Hi everybody...

Great forum you have here !!!

I thought I would post here and ask the pro's as I am finding all sorts of different switch mods out there...

I am looking for a switch for my Solarforce L2M. What I would like is the reverse switch momentary type with as light as touch as possible. This particular L2M is being converted to a E-CIG device. It only need to be N.O. Momentary with no extra's like the 3 level modes or anything like that. Again the lighter the touch the better as the location of the switch will require a pinkie finger to activate while taking a draw.

Thanks a bunch in advance !!!

 

[Parky50]

After further research.... maybe I'm looking for a "Forward Type"
I'm obviously a bit confused.... :confused:

 

[kosPap]

please make a search on "forward switch solarforce" and star by looking ta my sig...

 

[LV426]

The Solarforce "S"-tailcaps have a switch as light as a feather... But they are big and the finish don't match the L2M at all.

The S5-switch doesn't fit the standard L2-tailcap.

I think the "romisen fwd" is the best o.a. choice.
(http://www.candlepowerforums.com/vb/showpost.php?p=3379982&postcount=15)


Size comparison

S5 fwd switch

L2P rev. switch

Romisen "RC-N3" fwd switch

(Sorry for the crappy closeups!)

 

[kosPap]

what the N3's diameter? is it the same with the G2's

 

[LV426]

N3 outer ø is 18mm. (No info on the G2.)

 

[Tedfs]

I installed a McClicky in my Solarforce, fits just fine.

The Solarforce rubber boot has a nub on the inside end that I had to remove with a razor blade to prevent the McClicky from being too easy to activate. If you leave that nub of rubber on, it might have the light touch/easy activation you are looking for.