SOLD!!!!!!!!!!!!!!!!!!!!!! moved this from bst lights
All prices include shipping within the continental U.S. International Shipping Please Add 5.00
1. Excellent Condition Mr. Bulk Bare Aluminum Lion Cub + 18650 tube. Both freshly polished and sporting some "Bling".
- Bezel has been opened up from the stock peephole and this light puts out alot more light than stock.
- The Lanyard hole has been converted to accomodate some darkness location effects. The chamber was enlarged and the base coated with high ratio green Strontium/Devcon crystal epoxy and a 9 X 2 mm green tritium tube was nestled into the glow goo. Next , Devcon crystal drying epoxy was applied over the trit/glow layer to just above the flush point. The epoxy above flush was hand polished down to a near seamless melding with the Lioncub body. I personally think it looks fantastic but lanyard junkies may feel otherwise.
- An additional Glowing Oring is installed within the bezel and glows green after charging with the LED.
-I believe this is a TXOJ emitter (stock)
-batteries not included
145.00 (Price Dropped-again) shipped conus-intnl 5.00 extra *** includes extra 18650 battery tube!
In this image only the glowpowder is seen glowing as it overpowers the trit, but it's in there!
Also interested in trades for Exc cond/like new Microtech Utx-70 (s30v version only) and Arc 4+ (must include original clip - and must have serial number) Or CR2 ION (prefer ha-natural version)
I accept Paypal , no credit cards.
First I'll take it, gets
Works as new, excellent condition.
All prices include shipping within the continental U.S. International Shipping Please Add 5.00
1. Excellent Condition Mr. Bulk Bare Aluminum Lion Cub + 18650 tube. Both freshly polished and sporting some "Bling".
- Bezel has been opened up from the stock peephole and this light puts out alot more light than stock.
- The Lanyard hole has been converted to accomodate some darkness location effects. The chamber was enlarged and the base coated with high ratio green Strontium/Devcon crystal epoxy and a 9 X 2 mm green tritium tube was nestled into the glow goo. Next , Devcon crystal drying epoxy was applied over the trit/glow layer to just above the flush point. The epoxy above flush was hand polished down to a near seamless melding with the Lioncub body. I personally think it looks fantastic but lanyard junkies may feel otherwise.
- An additional Glowing Oring is installed within the bezel and glows green after charging with the LED.
-I believe this is a TXOJ emitter (stock)
-batteries not included
145.00 (Price Dropped-again) shipped conus-intnl 5.00 extra *** includes extra 18650 battery tube!
In this image only the glowpowder is seen glowing as it overpowers the trit, but it's in there!
Also interested in trades for Exc cond/like new Microtech Utx-70 (s30v version only) and Arc 4+ (must include original clip - and must have serial number) Or CR2 ION (prefer ha-natural version)
I accept Paypal , no credit cards.
First I'll take it, gets
Works as new, excellent condition.
Last edited: