*Clearance Sale* LED module for Surefire M3T/M4/M6/KT1/KT2/KT4 head. US$35 shipped.
(Empty tower that could accept 17mm driver board is at: http://www.candlepowerforums.com/vb/showthread.php?t=231238
LED module in my KT1 head:
Specs below:
Black anodized.
Input Voltage: 5~18v
LED driven current: ~750mA single-mode output
LED: Edison-OPTO cold white KLC8
Estimated output: 135~165Lumen (I didn't have equipment to verify, sorry)
Battery side current: 2xRCR123: ~0.4A, 3xRCR123: ~0.26A (open voltage of battery is 4.1v)
Beam shots with KT1 head below. The hotspot is tighter in KT head. My digital camera's auto white balance isn't good, it's yellower like ordinary KLC8 LED.
(left is about 1.5m to ceiling, right is about 10cm to wall)
E.V. -1.5
E.V. 0
E.V. +1.5
I have 0 left. (ALL SOLD)
Price: US$35 each shipped worldwide.
They will be shipped worldwide via registered airmail. Trackable but not insured. Shipping with insurance is optional at buyer's expense. If not insured, after I handed it to post officeI couldn't be responsible for item lost or damage in transit. If you want insurance, please let me know your country and I'll figure out if it's available and the additional charge.
I accept PayPal payment only. No eCheck payment since it'll need over one month to clear. Here's my PayPal address (No PP fees):
(all sold)
(please remove all spaces)
Please remember to include you CPF ID and quantity in PayPal note!
Thanks.
==== Order List ====
M.S, 1 pcs, PP received, shipped on 5/13
Toglud, 1 pcs, PP received, shipped on 5/13
greenpea76, 1 pcs, PP received, shipped on 5/13
gswitter, 1 pcs, PP received, shipped on 5/13
brammalay, 1 pcs, PP received, shipped on 5/27
Eye See, 1 pcs, PP received, shipped on 7/9
monanza, 1 pcs, PP received, shipped on 7/12
cnee, 1 pcs, PP received, shipped on 7/13
karlheinz3, 1 pcs, PP received, shipped on 7/15
maxspeeds, 1 pcs, PP received, shipped on 7/15
tanasit, 2 pcs, PP received, shipped on 7/15
(Empty tower that could accept 17mm driver board is at: http://www.candlepowerforums.com/vb/showthread.php?t=231238
LED module in my KT1 head:
Specs below:
Black anodized.
Input Voltage: 5~18v
LED driven current: ~750mA single-mode output
LED: Edison-OPTO cold white KLC8
Estimated output: 135~165Lumen (I didn't have equipment to verify, sorry)
Battery side current: 2xRCR123: ~0.4A, 3xRCR123: ~0.26A (open voltage of battery is 4.1v)
Beam shots with KT1 head below. The hotspot is tighter in KT head. My digital camera's auto white balance isn't good, it's yellower like ordinary KLC8 LED.
(left is about 1.5m to ceiling, right is about 10cm to wall)
E.V. -1.5
E.V. 0
E.V. +1.5
I have 0 left. (ALL SOLD)
Price: US$35 each shipped worldwide.
They will be shipped worldwide via registered airmail. Trackable but not insured. Shipping with insurance is optional at buyer's expense. If not insured, after I handed it to post officeI couldn't be responsible for item lost or damage in transit. If you want insurance, please let me know your country and I'll figure out if it's available and the additional charge.
I accept PayPal payment only. No eCheck payment since it'll need over one month to clear. Here's my PayPal address (No PP fees):
(all sold)
(please remove all spaces)
Please remember to include you CPF ID and quantity in PayPal note!
Thanks.
==== Order List ====
M.S, 1 pcs, PP received, shipped on 5/13
Toglud, 1 pcs, PP received, shipped on 5/13
greenpea76, 1 pcs, PP received, shipped on 5/13
gswitter, 1 pcs, PP received, shipped on 5/13
brammalay, 1 pcs, PP received, shipped on 5/27
Eye See, 1 pcs, PP received, shipped on 7/9
monanza, 1 pcs, PP received, shipped on 7/12
cnee, 1 pcs, PP received, shipped on 7/13
karlheinz3, 1 pcs, PP received, shipped on 7/15
maxspeeds, 1 pcs, PP received, shipped on 7/15
tanasit, 2 pcs, PP received, shipped on 7/15
Last edited:
