Hammer Train
Banned
- Joined
- Sep 3, 2008
- Messages
- 716
NOW - SOLD
I have for sale or for trade, my Mag 3D Camo-print modified with a Q5 led drop in using the standard Mag switch (you can still use a normal bulb if you want to!). It is still focusable by twisting the head, and the Q5 has been sealed in place with artic aluminum to ensure best focus from the lens for max throw. It has an aspheric lens. Around the Q5 is a ring of V10 green glow powder (as much as I could mix with Devcon 2ton clear epoxy), and another huge amount has been placed around the outside of the heatsink for the Q5 to give enough glow to be incredibly bright and project a good few feet and stay glowing for hours!
The light runs on 3D cell batteries, and runs on a driver (regulated).
The bezel is custom made with threads on both ends to accept any 55mm camera lens or bezel. The reason for this is to protect the lens. I will include in the sale the metal 55mm camera bezel that I bought for the light, it really does make the light look good!
It also has a lcustom made lanyard ring and additional o-ring to retain water-proofing between the tailcap and the body. I have coated this in V10 too so you can find it in the dark,
I will include with the light the original camo bezel and a glass lens and a cut-down mag reflector so that you can use it as a standard 3D if you choose to, and the inner glow powder ring is not obstructed by the reflector so it retains the glow even in standard format.
I will post a picture as soon as I get a chance.
As I have said in the title, this is a one off, and I'm sorry to let it go but I have no use for it at the moment so it has to go! I'm in the UK, so the price is in £GBP. $ price for Worldwide shipping, shipping cost will need to be added at cost.
Thanks, Peter.
I have for sale or for trade, my Mag 3D Camo-print modified with a Q5 led drop in using the standard Mag switch (you can still use a normal bulb if you want to!). It is still focusable by twisting the head, and the Q5 has been sealed in place with artic aluminum to ensure best focus from the lens for max throw. It has an aspheric lens. Around the Q5 is a ring of V10 green glow powder (as much as I could mix with Devcon 2ton clear epoxy), and another huge amount has been placed around the outside of the heatsink for the Q5 to give enough glow to be incredibly bright and project a good few feet and stay glowing for hours!
The light runs on 3D cell batteries, and runs on a driver (regulated).
The bezel is custom made with threads on both ends to accept any 55mm camera lens or bezel. The reason for this is to protect the lens. I will include in the sale the metal 55mm camera bezel that I bought for the light, it really does make the light look good!
It also has a lcustom made lanyard ring and additional o-ring to retain water-proofing between the tailcap and the body. I have coated this in V10 too so you can find it in the dark,
I will include with the light the original camo bezel and a glass lens and a cut-down mag reflector so that you can use it as a standard 3D if you choose to, and the inner glow powder ring is not obstructed by the reflector so it retains the glow even in standard format.
I will post a picture as soon as I get a chance.
As I have said in the title, this is a one off, and I'm sorry to let it go but I have no use for it at the moment so it has to go! I'm in the UK, so the price is in £GBP. $ price for Worldwide shipping, shipping cost will need to be added at cost.
Thanks, Peter.
Last edited:
