ateallthepies
Enlightened
Hello all,
I received today a Spiderfire X-03 host with an extender that I will run a LF IMR-9 lamp with 2X18650 IMR's.
Well I wasn't expecting much with these cheap Hong Kong sourced items but the quality was pants to be honest
First the bezel is held on by half a thread and can be pulled off with some effort. Then the glass rattles and an extra O ring won't allow the bezel to screw on at all.
The threads are very rough with nice sharp edges to cut yourself on.
The worst thing is the extender tube is too long by about 10mm and will not make contact using 2X18650's:shakehead
So I had to get my super glue out, my box of springs and sand paper and Nyogel and do some alterations.
I have the thing now working as it should and running a LF E0-9 while I await arrival of an IMR-9.
No real moral to this short tale just a heads up really!
I hear mentioned a lot the Solarforce L2 hosts, are these any better than my Spiderfire?
ATB,
Steve.
I received today a Spiderfire X-03 host with an extender that I will run a LF IMR-9 lamp with 2X18650 IMR's.
Well I wasn't expecting much with these cheap Hong Kong sourced items but the quality was pants to be honest
First the bezel is held on by half a thread and can be pulled off with some effort. Then the glass rattles and an extra O ring won't allow the bezel to screw on at all.
The threads are very rough with nice sharp edges to cut yourself on.
The worst thing is the extender tube is too long by about 10mm and will not make contact using 2X18650's:shakehead
So I had to get my super glue out, my box of springs and sand paper and Nyogel and do some alterations.
I have the thing now working as it should and running a LF E0-9 while I await arrival of an IMR-9.
No real moral to this short tale just a heads up really!
I hear mentioned a lot the Solarforce L2 hosts, are these any better than my Spiderfire?
ATB,
Steve.
Last edited: