• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

For Sale - Flashlight SureFire and some others

desert.snake

Flashlight Enthusiast
Joined
May 8, 2017
Messages
2,238
Location
Eastern Europe
15) Surefire Z2 Combatlight, good condition

SureFire A2 Incan, good condition, 3 LED replaced with 5mm 3300K 94 CRI, there is some white coating in the grooves of the notches, these are not chips

Both for $220 >> 190 including international shipping




5) SF Beast, good condition, full set

$4400 >> 4000 >> 3700 >> 3500 >> 3000 including international shipping

SF Beast 2 my 1.png
SF Beast 2 my 2.png
SF Beast 2 my 3.png
SF Beast 2 my 4.png
SF Beast 2 my 5.png
SF Beast 2 my 6.png
SF Beast 2 my 7.png
SF Beast 2 my 9.png




---------- SPF below this line ----------



---------- Sold below this line ----------

10) SureFire KL4 in unopened blister, NOS, black anodizing, 2 pieces left

$50 for each
$85 for 2 pcs
delivery only CONUS

13) HDS Executive, green ceracore, used, LED modified to XHP50.3HI 3V 5700K, now 337 lm hotspot width is the same as the standard version HDS XP-L

Sold $210 >> 180 >> 160 >> 145
delivery only CONUS

9) LUX-RC 334 - 3 mode low/med/high without memory, XP-G2 ~4500K in SolarForce L2X host 2x18650. The same boards were in 6P dropin Oveready Torchlab Triple LMH

Sold $200 >> 160 >> 140
delivery only CONUS

11) SureFire G2D Fire Rescue, one NOS, second without box, little used, has a couple of creases on the head

Sold $ 160 for both
delivery only CONUS

6) SF Aviator A2 LED, second red, NOS

Sold $190 >> 150 including international shipping

3) McGizmo AquaRam, XP-L HI, 1*18650, new from McGizmo

Sold $500 >> 480 >> 450

located in Iowa, only CONUS

4) McGizmo Makai, 2*123, LE 6V (run on 2*CR123 / 2*16340 / 1*16650), good condition

Sold $500 >> 480

1) Mac's Customs XM-L 18350 Deep Head

Very similar SF 3P in size, but powered by 16340 / 18350

Unused but has some surface wear on the aluminum machine finish from storage

Sold $ 400 including international shipping
 
Last edited:
I also plan to make a batch of bezels for HDS. 30-33 pieces of aluminum bronze С61900 and 20-23 pieces of beryllium copper C17200. Preliminary price 100 for Al and 160 for beryllium. It will take 1.5-2.5 months. If there are those interested, then can make them either with teeth or without teeth, and add tritium slots. Once I made a few pieces to try, it seemed to work out well. In the photo are old ones made of stainless steel and zirconium
 

Attachments

  • Bezel Test Result 1.jpg
    Bezel Test Result 1.jpg
    45.6 KB · Views: 70
  • bezels_part_1.jpg
    bezels_part_1.jpg
    349.5 KB · Views: 71
  • HDS Tritium Test.jpg
    HDS Tritium Test.jpg
    136.4 KB · Views: 71
  • IMG_3709.JPG
    IMG_3709.JPG
    1.8 MB · Views: 121
Last edited:
Top