Here's another KL4 P7 mod inspired by DaFABRICATA. This one is direct drive for maximum brightness as requested by the owner. Now that the IMR16340 cells are finally released this one can safely be run in a E1E body for small blinding light (with the exception of overheating of course). Too bad my IMRs have not arrived in time for testing this head.
The KL4 is a newer one so it has a bit more mass to the head than the older version but also requires more work to modify for a P7. I modified the head using a Dremel just as I did with my HDS P7 mod. I sputtered the reflector to completely eliminate the donut hole. Hope the owner enjoys. :wave:
-KL4 (newer gen)
-SSC P7 DSWOJ
-Sputtered Reflector
-2.8A direct drive on an AW 17670
-2.5A direct dive on a n AW IMR16340
Left: P7 KL4, Right: Stock KL4 (brightest KL4 I have)
Same order, low exposure
The KL4 is a newer one so it has a bit more mass to the head than the older version but also requires more work to modify for a P7. I modified the head using a Dremel just as I did with my HDS P7 mod. I sputtered the reflector to completely eliminate the donut hole. Hope the owner enjoys. :wave:
-KL4 (newer gen)
-SSC P7 DSWOJ
-Sputtered Reflector
-2.8A direct drive on an AW 17670
-2.5A direct dive on a n AW IMR16340
Left: P7 KL4, Right: Stock KL4 (brightest KL4 I have)
Same order, low exposure
Last edited: