Some other information:
I had needed some high current clicky switch for my direct drive lights & decided to try Tana's method of modding the Judco 10A switch to fit a Surefire Z41 tailcap.
I bought 10 switches to build 2, in case I fail big time...
oo:
So long story short, I have managed to make the 2 pieces that I needed (HURRAY) & now I still have several spares parts lying around.
After checking with Tana, he has allowed me to sell my extras switches.
Link to Tana's
original build thread
Actual usage:
The first 2 piece that I have made for myself have been used over a week on my direct drive P60 XM-L dropin & Vinh CQvn with no issues.
It has been put into & removed from the tailcap several times & the switch has held it place without budging.
When screwing in the switch, use a long nose pliers & hold the switch on the side.
Stop tightening once you feel sufficient resistance from the rubber boot being compressed.
Do not over tighten as it may potentially dislodge the switch.
Parts used:
Judco 10A switch
Spring: Top diameter 4mm, base diameter 6.6mm, height 6.2mm, line thickness 0.6mm
Brass McClicky retaining ring
Fujik thermal epoxy -->
Selley's 2 Part Epoxy
Sales Information:
** Disclaimer **
The listing is based on a first come first serve basis (PM or on thread).
As I will be making these switches after work, I will probably be able to complete 1 to 2 pieces at a time, hence it will take time & they will be sent to those names based on numerical order.
The ETA is a rough estimate since I am buying parts from various sources & their shipping time are different.
** Payment & Shipping **
I will not accept any payment upfront or deposit till the switches are ready to be shipped.
I will contact you via PM when your switch(es) are ready & prompt payment is appreciated.
Shipping address is based on Paypal address, so please send the correct address.
Shipping with tracking is
$5 (flat rate) unless it exceed the amount by too much.
Batch 0:
Hiro Protagonist *paid & shipped*
Batch 1 (5 pieces): ETA Early Jan 16
1 *anonymous* *paid & shipped*
2 *anonymous* *paid & shipped*
3 Nbjly *paid & shipped*
4 KellyGlanzer *paid & shipped*
5 KellyGlanzer *paid & shipped*
Batch 2 (14 pieces): ETA Mid-end JAN 16
1 Nfetterly *paid & shipped*
2 Nfetterly *paid & shipped*
3 Monanza *paid & shipped*
4 Monanza *paid & shipped*
5 Monanza *paid & shipped*
6 Jmoyat *paid & shipped*
7 FatRat *paid & shipped*
8 jso902 *paid & shipped *
9 KuanR *paid*
10 Autogiro *paid & shipped*
11 Autogiro *paid & shipped*
12 Father Azmodius *paid & shipped*
13 Father Azmodius *paid & shipped*
14 DrafterDan *paid & shipped*