JonSidneyB
Flashlight Enthusiast
I wonder how many would EDC this. I was thinking of a FireFly built with the intent of using Pila 168's or 2 123's interchangeable. While this will make a longer light, it will still be quite narrow. I was not thinking of this as being the brightest light out there. But as a practical EDC Tool that would allow either the use of rechageable or a regular 123's.
The other alternative would be to try this. Build single 150's sized Pila pack, then build a threaded plug to turn the body of the current firefly into a batter case.
You could start out with a Pila 150's running the FireFly, if your battery runs dry in an area where you can not recharge it, not a problem, remove the plug from the 123 body and you are back in business, now that same plug can protect your 150s until you can get it charged again.
The other alternative would be to try this. Build single 150's sized Pila pack, then build a threaded plug to turn the body of the current firefly into a batter case.
You could start out with a Pila 150's running the FireFly, if your battery runs dry in an area where you can not recharge it, not a problem, remove the plug from the 123 body and you are back in business, now that same plug can protect your 150s until you can get it charged again.
