Sold/Expired WITHDRAWN

[Metatron]

Hardware:

- HA black 1 C Mag, tailcap bored for shorter length
- (2) Sharks in parallel
- (2) SharkSink C, HA natural
- Shark topside micro heatsinks on IC and diode
- (1) 20K ohm log pot
- HA black LZ pot knob w/ trit vial indicator
- (4) Cree Q5 WG
- PXR19-C heatsink, HA black
- (3) McR19XR w/ MirageMan centering rings
- (1) 18mm X 6mm back focal length AR coated aspheric lens
- (1) custom lens holder physically interchangeable w/ McR19XR
- (3) trit vials installed under aspheric
- UCL lens
Specs:

- Powered by 1 AW Li-ion C cell
- Sharks are wired in parallel, each driving (2) Crees
- Vf or LED pairs ~ 6.9 V @ 350 mA
- Current pot-adjustable from 0 - 650 mA (knob rotation mechanically limited)
- Cell draw 3.4 A on hi, fully charged cell
- Runtime 45 - 55 minutes on hi
- Measures ~ 13,000 lux @ 1m on hi



not responsible for loss or damage after this gem has left my care

thanks for looking folks!

 

[griff]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Nice Steve!!
Good luck Mate!

 

[LED Zeppelin]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Here's a full pictorial on this light.

If you look closely at the pot shaft in the pic below, you can see a small rollpin to the left of the shaft, slipped into a hole drilled into the tube. This pin rides the slot on the underside of the knob.

The pin limits rotation of the knob to keep the current in line with what the AW C cell can deliver. If using a high current cell, the pin can be pulled for full pot rotation and LED current of near 1A.



Lots to fit in a C tube:



There are 3 green trits under the aspheric lens:



Another trit in the knob:



Next to a 2C Mag:

 

[warx23]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Great looking light! :thumbsup: Those aspherics you make are most excellent.

if Griff didnt just extract all my extra $$ Id be on this one.

Good luck sir.

 

[toby_pra]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Wow that light looks great!

Good luck with selling...

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

damn that light looks good, ty for ur kind words and help here:twothumbs

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

bumpity:twothumbs

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

bumpity

 

[griff]

Re: FS: Quad Cree 1C Mag with aspheric/reflector combo

Any beamshots???

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric (trades?)

bumpity bump

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric (price drop)

bumpity

 

[nein166]

Re: FS: Quad Cree 1C Mag with aspheric (price drop)

PM Sent

 

[Metatron]

Re: FS: Quad Cree 1C Mag with aspheric (price drop)

PM Sent

no pm received mate, try again?
steve

 

[Metatron]

Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen

bumpity

 

[griff]

Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen/ ME II rcr

I have a Black Griffin but not a Black Griffen:devil:

 

[Metatron]

Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen/ ME II rcr

I have a Black Griffin but not a Black Griffen:devil:

florsh braden anweil athenuec:devil::devil:

 

[GryphonQ]

Re: WTT: LZ's Quad 1C with aspheric FOR Black Griffen/ ME II rcr

I was out of town when this was posted. I might be interested, depending on price. If you still want to sell it, please PM/email me with that info. I'd need to figure out where to get an AW-C cell and charger...

Thanks! RG